Manuals / Paradyne / Computer Equipment / Network Card

Paradyne JetFusion Integrated Access Device manual

Models: JetFusion Integrated Access Device

1 297

Download 297 pages 52.68 Kb

Page 247

set lan rip

set lan stp bridge

set mgcp bracketing

set mgcp listening port

Description. Enables or disables RIP on a WAN IP port If you do not enter any optional parameters, the IAD performs the command against the first available slot, interface and port.

set lan rip <on off> <version (1 2Bcst 2Mlti)> (slot) (interface) (port)

on off

Keyword to enable (on) or disable (off) RIP on the specified port. version 1 2Bcst 2Mlti

Keyword identifying version to implement. (Must be preceded by keyword version)

slot

Slot number (1 to 7) interface

Keyword identifying the interface: ethernet adsl xdsl sdsl port

Port number (0 to 7)

Description. Enables or disables Spanning Tree Protocol on a LAN port.

set lan stp bridge <on off> (slot) (interface) (port)

on off

Keyword to enable (on) or disable (off) STP on the specified port.

slot

Slot number (1 to 7)

interface

Keyword identifying the interface: ethernet adsl xdsl sdsl

port

Port number (1 to 8)

Description. When communicating with the notified entity (call agent), indicates whether the UDP port number should be wrapped in brackets for compatibility.

set mgcp bracketing <on off>

on off

Keyword to enable (on) or disable (off) MGCP bracketing.

Description. Specifies the UDP port the Notified Entity (call agent) is listening on.

set mgcp listening port <port>

2000-A2-GB20-10

- 228 -

February 2004

Image 247

Paradyne JetFusion Integrated Access Device manual Set lan rip on off version 1 2Bcst 2Mlti slot interface port

Contents

Document No -A2-GB20-10 JetFusionCopyright 2004 Paradyne Corporation All rights reserved Introduction PrefaceQuick Start Guide Chapter WAN Configuration Chapter AdministrationRouter Configuration Voice Path Configuration Bridge ConfigurationDhcp Server Configuration Firewall ConfigurationNAT Configuration Multicast ConfigurationIAD Reports Command Line Interface2000-A2-GB20-10 Viii February Menu Map Chapter Troubleshooting and DiagnosticsAppendix C JetFusion IAD Specifications Chapter VerificationAppendix E Glossary Appendix D Connector Pinouts3UHIDFH Audience Contents2000-A2-GB20-10 Xii February FCC Notice Product WarrantyConventions Regulatory NoticesIAD Underwriters’ Laboratories’ Statement Industry Canada NoticeDeclaration of Conformity CE MarkKonformitetserklæring Konformitätserklärung 2000-A2-GB20-10 Xvii February 16/24-Port IAD 8-Port IADData Interfaces FeaturesJetFusion 2/4/8-Port IAD Family Description Front Panel Power and Status IndicatorsJetFusion 16/24-Port IAD Family Rear Panel Connectors24-Port IAD Front Panel Front Panel LEDs AC PowerRS-232 Console Port Universal Serial Interface USI Port4XLFN6WDUW*XLGH IAD Package Components Installing the IADAC Power and Uninterruptible Power Supply Unpacking the IADConnect the IAD to a PC Wiring RequirementsPower Up the IAD Connect via Terminal EmulatorLog in via a Terminal Emulation Program Main Menu Setting the Ethernet Port IP AddressRouter Configuration Menu Resetting the IAD Running Telnet Connecting via TelnetType your password and press Enter to display the Main menu Using Menu InterfaceMain Menu for Supervisor Using Default or Current Values Entering Settings and ValuesNavigating the IAD Menu Interface WAN Connections Basic IAD Configur- ation ConnectingUSI Telephones Ethernet LAN ConnectionTelephone Connections USI Connection 16/24-PortMaking RJ21X Connections 16/24-Port Confirming Proper SetupReset the IAD Verify Normal Power Up and Operation$GPLQLVWUDWLRQ Security Level Privileges Security level IAD SecurityPrivileges Default User IDs and Passwords Security Level Changing a PasswordChanging the User Level User ID Including User ID and Passwords in Config FilesChanging the Radius Server Address Server SettingsChanging the Radius Encryption Secret Displaying the Radius Configuration Using the Snmp Configuration Menu Setting UpEnabling Snmp via IP and EOC Configuring the System ContactEnabling and Disabling Snmp via IP Enabling and Disabling Snmp via EOCConfiguring the Snmp Trap Host IP Address Configuring the System NameConfiguring the System Location Configuring the System CommunityEnabling or Disabling Snmp Traps via EOC Configuring Restart Trap Maximum DelayUpgrading via Tftp Using Tftp Servers via LAN or WANUpgrading the System Copying the Source FilesFile Transfer Menu Verifying the UpgradeEstablishing LAN Speed and Duplex Mode Setting up Your LAN ConnectionSelecting the Connection Pinging Network Devices Using System UtilitiesConfiguring the Console Timeout Period Using Trace RouteSetting up the USI Port Configuring the Console Baud RatePerforming a Hard Reset Managing Configuration FilesSetting System Defaults Clearing the Last Reset Reason Saving System SettingsDisplaying the Event Log Displaying the IAD File Directory Using the File SystemFormatting the File System Copying FilesRenaming Files Deleting FilesSetting the Ethernet MAC Address Using Debug MenuEnabling and Disabling PPP Debug Mode Enabling and Disabling Dhcp Client Debug Mode Enabling and Disabling STP Debug ModeDisplaying Error Dumps Performing File Transfers Loading a Boot ROM FileUpdating Acos Using File Transfer UtilitiesUpdating the System 12. Tftp Server Menu Using the Tftp Server MenuEnabling and Disabling Derived Timing Setting Derived Timing OptionsEnabling and Disabling Derived Timing Debug Messages Verifying an IP Address for Windows Systems Verifying An IP AddressVerifying the IAD IP Addresses $1&RQILJXUDWLRQ Basic WAN Setup TasksXDSL WAN Configuration Flowchart T1/E1 WAN Configuration Flowchart Identifying your WAN Interface and Datalink Protocol Shdsl with ATM Using the WAN Con- figuration MenuSdsl with Frame Relay Sdsl with ATMSelecting ATM or Frame Relay Selecting the Datalink ProtocolWAN Configuration Menu Frame Relay Physi- cal Inter- face Selecting the xDSL Interface Type Configur- ing Shdsl Interface10. G2237 xDSL Configuration Menu Enabling and Disabling xDSL Debug Messages Selecting CPE or CO ModeEnabling and Disabling Adaptive Rate Mode Selecting the Line Rate13. G2237 xDSL Configuration Menu Configur- ing the Sdsl Inter- face- JF2100Configuring the Adaptive Rate Mode Configur- ing the Sdsl Inter- faceSetting Auto Sense-Coppermountain Dslam Setting Auto Cycle-Nokia DslamEnabling Autobaud Mode-Conexant Dslam Setting AccessLan CPE Mode-AccessLan Dslam Setting Sync Delay-Lucent DslamConfiguring the Sdsl Auto Cycle Speed Table Setting Sdsl Speed for Imas DSLAM-Nortel DslamSetting Sdsl Speed Manually Setting Sdsl Interface ModeUsing the Debug Menu Configur- ing the Adsl Inter- face21. WAN Configuration Menu for T1/E1 Setting the Interface to T1 or E1Switching from T1 to E1 Configur- ing the T1 InterfaceSwitching from E1 to T1 24. T1 Configuration Menu Selecting Frame ModeConfiguring Loopback Setting Line Build OutSelecting B8ZS or AMI Enabling or Disabling All Channels Configuring the Transmit and Receive ChannelsEnabling or Disabling Specific Channels Configuring Transmit Clock SourceSelecting a Channel Range Displaying Physical Layer Stats and Alarm Log Configur- ing the E1 InterfaceSelecting Frame/CRC4 Mode 31. E1 Configuration menu Configuring S-Bits33. Configure S-Bits Menu 35. Select Tx Clock Source menu Configuring the Transmit Clock SourceATM PVCs ConfiguringAdding a PVC Enter Virtual Port Identifier VPI 37. ATM Encapsulation Configuration Menu Modifying a PVC Setting up AAL5 or AAL0 EncapsulationSetting up RFC 1483 VC Muxing or RFC 1483 LLC Encapsulation Setting up Proprietary Voice Encapsulation44. ATM PCR Configuration Menu 46. ATM Encapsulation Configuration Menu 48. AAL2 Audio Profile Format Menu Setting up AAL1/CESDeleting a PVC Setting up AAL2/LESShowing Current PVCs Configuring Payload ScramblingConfiguring the F4 OAM Type Configuring the F4 OAM VPISending OAM Loopback Displaying F4 OAM ConfigurationConfiguring EmptyCells Frame Relay DLCIsModifying a Dlci Adding a Dlci Configuring Transmit CIRConfiguring FRF.12 Fragmentation Configuring Receive CIRDeleting a Dlci Frame Relay OptionsDisplaying Current DLCIs Selecting Fragmentation Types Setting FRF.12 ConfigurationEnabling or Disabling FRF.12 Enabling Automatic Fragment Sizing Setting the Fragment Size ManuallyCopperMountain Fragmentation Configuration Setting Real Time DlciConfiguring the Congestion Parameters Configuring the Maintenance ProtocolToggling Cmcp Debugging Enabling or Disabling Coppermountain CmcpQuick Con- figuration 66. WAN Configuration Menu5RXWHU&RQILJXUDWLRQ Router Configuration Task Flowchart Basic Router Setup TasksPort IP Address Router Configura- tion MenuPCR Unconfig- uring a Port IP Address Enabling RIP Globally Enabling and Disabling RIP Poisoned Reverse by PortSetting the RIP Version Adding a Static Route Managing Static Default Routes2000-A2-GB20-10 104 February Removing a Static Route Setting Default RouteAdding or Changing the Default Route Removing the Default RouteSetting the DNS Server IP Address Configur- ing DNS ClientSetting the DNS Server Timeout Displaying the DNS Cache and Statistics Configur- ing Dhcp ClientConfiguring the Dhcp Server IP Address Configur- ing Dhcp RelayEnabling and Disabling Dhcp Relay Displaying Dhcp Relay Statistics Choosing a Port for IP Filtering IP Filtering Configuration MenuToggling Between Input and Output Filters Globally Enabling and Disabling FiltersDisplaying Filters Filter Parameters Inserting, Appending and Editing FiltersDescription Copying a Filter Copying Filters for EditingDisplaying a Filter in the Buffer Deleting a Filter from the Buffer Editing a Filter in the BufferFilter Details Parameter Description Clearing IP Filtering Statistics Deleting an IP FilterDeleting All Filters of the Chosen Type Showing IP Filtering StatisticsIP Header Compression for SDSL, Port 1 is currently Description Route Table ParametersULGJH&RQILJXUDWLRQ Bridge Configuration Task Flowchart Basic Bridge Setup TasksEnabling and Dis- abling Bridging Bridge Configura- tion MenuEnabling or Disabling Bridging by Port Enabling or Disabling Bridging GloballySetting Bridge Aging Timer Enabling or Disabling STP Globally Enabling and Dis- abling STPEnabling or Disabling STP by Port Type the number of the port IAD displays a prompt Enter Bridge Hello Time1..10 Deleting a Bridge For- warding Database Entry Rqiljxudwlrq Basic Voice Path Setup TasksSetting the Voice Gate- way Voice Path Configura- tion MenuVoice Configuration Menu Pots Telephone Interface Start Mode Selection Menu Configuring Start Mode on an Individual Port Setting All Ports to Loop StartSetting All Ports to Ground Start Displaying Start ModeSetting Com- pander Mode Setting Slic Con- trol ModeDisplaying Idle High Voltage Settings Set On Hook Transmis- sion Mode Setting Idle VoltageEnabling and DIsabling Idle High Voltage Globally Displaying Echo Cancellation Settings Setting Debug Mode Configur- ing Echo Cancella- tionReset the IAD Enabling and DIsabling Echo Cancellation GloballySetting Loop Gain for All Ports Setting Loop GainEnabling and DIsabling Echo Cancellation for all Ports Enter Transmit Loop Gain for all ports range -9dB/ 3dB -2dB Displaying Loop Gain Settings Setting Country ModeConfiguring Loop Gain Setting by Port Embedded Client 11. Country Mode Selection Menu12. MGCP/NCS Management Menu Configuring Mgcp ParametersRemoving a Connection Port AdministrationDisplaying Mgcp Statistics Debugging MgcpDisplaying the Current Admin State Configuring Admin State per portConfiguring Default Packet Size Setting Admin State GloballyClearing CopperCom Statistics CopperCom ConfigurationManaging Copper Com Call Control Displaying CopperCom StatisticsSetting Compression Format Displaying CopperCom ConfigurationSetting Framing Format Performing a Ring Test JetStream Call Con- trol Set- tingsCopperCom Debug Control Displaying StatisticsDisplaying Ring Test Parameters Configuring Trace SettingsConfiguring the Ring Test Displaying the IAD StateSelecting Insufficient Bandwidth Sound Configur- ing AAL2Configuring for AAL2/LES CAS Resetting StatisticsManual Configuration Configuring the IAD for a Specific AAL2/LES GatewayEnabling and Disabling Ports Changing the Maximum CPS-SDU Size Setting the CAS Refresh RateSetting the Combined Use Timer Enabling and Disabling Idle CAS RefreshingDebugging AAL2/LES Gateways Displaying AAL2/LES Statistics Setting ATM Pace Control ManuallySetting the Audio Bit Rate Margin Setting the Minimum Signaling Bit RateDisplaying Audio/CAS/Alarm Statistics Configuring for AAL2/LES CCS-ELCPClearing Statistics Setting Debugging Options Configuring Variant/Interface ManagementDebugging for AAL2/LES CCS-ELCP Displaying V5 FSM States Viewing AAL2/LES StatisticsClearing AAL2 Channel Statistics Displaying AAL2 Channel StatisticsCreating a Firewall via IP Filtering LUHZDOO&RQILJXUDWLRQBasic Server Setup TasksEnabling and Dis- abling Dhcp Server Configur- ation MenuUsing Debugging MessagesIf Dhcp Relay is not enabled, the IAD displays this prompt Dhcp Address Range Pool Configur- ing a Dhcp Client Entry Current Subnet Mask = 0.0.0.0 Enter new Subnet Mask Dhcp Server Details Field Server DetailsDhcp Server Assigned Addresses Field Description Displaying Dhcp Server Sta- tisticsServer Assigned and Unas- signed Addresses Dhcp Server StatisticsDhcp Entry Details Value Description Entry DetailsDeleting a Dhcp Cli- ent Entry Assign- ment EntryMulticast Configuration Menu Configur- ing Multi- cast2000-A2-GB20-10 164 February Multicast Routing Source Menu Managing Multicast Route Source Adding a RoutingNetwork Address Netmask Incoming Interface Multicast Routing Table Fields Description Multicast Routing Table Fields Displaying PIM Neighbor$7&RQILJXUDWLRQ Range Default NAT Default Parameter SettingsNAT Translation EnablingNAT Local Server NAT Local Server Protocol Configuration MenuUpdating NAT Local Server entry 1, Translated IP address NAT TimeoutsNAT Port Range NAT Alias Entry NAT Statistics Report Entry NAT StatisticsConnection Details ConnectionNAT Connection Table Report Entry NAT Connection Details Report Entry NAT Alias Table Report Entry Description NAT Alias TableDeleting IP Addresses from NAT Tables NAT Local Server Table Report Report EntryDeleting a NAT Local Server Entry NAT Alias Reports Menu Report MenuCurrent Configuration Report Parameter Current Configur- ation ReportT1/E1 Only Port # Network Statistics ReportsIcmp Statistics Report Parameter Description Icmp Statistics ReportIcmp Statistics Report Parameter Igmp Statistics ReportQueries, Reports and Messages Received Igmp Statistics Report Parameter DescriptionIgmp Statistics Report Parameter IP Statistics ReportIP Statistics Report Parameter Description IP Statistics Report Parameter PIM Statistics ReportPIM Statistics Report Parameter Description TCP Statistics Report Parameter Description TCP Statistics ReportTCP Statistics Report Parameter Clearing Network Statistics UDP Statistics ReportUDP Statistics Report Parameter Description Clear Network Statistics Menu Interface Statistics ReportsARP Statistics Report Parameter Description ARP Statistics ReportARP Statistics Report Parameter Interface Statistics ReportInterface Statistics Report Parameter Description Interface Statistics Report Parameter Dlci Statistics Report Bridge Statistics Report10.Bridge Statistics Report Parameter Description Received Frame Information 11.DLCI Statistics ParameterAAL1 Cpcs Statistics Report ATM PVC Statistics Report12.AAL1 Cpcs Statistics Report Parameter 13.Common CPCS-2 Statistics Report Parameter AAL2 Statistics ReportCommon AAL Statistics Report Cumulative CPCS-2 Statistics Report15.Common AAL Statistics Report Parameter 15.Common AAL Statistics Report Parameter 16.IP Header Compression Statistics Report Parameter IP Header Compression Statistics ReportClearing Interface Statistics PPP Statistics Report17.PPP Statistics Report Parameter Description Media Statistics Menu Sample Media Sta- tistics Reports18.Frame Relay Statistics Report Frame Relay Statistics Report19.Serial Statistics Report Parameter Serial USI Statistics Report19.Serial Statistics Report Parameter Description ATM Statistics Report20.ATM Statistics Report Field 20.ATM Statistics Report Field 21.G2237 xDSL Statistics Report Parameter G2237 xDSL Statistics Report21.G2237 xDSL Statistics Report Parameter 22.Ethernet Statistics Report Parameter Description Ethernet Statistics Report22.Ethernet Statistics Report Parameter 23.G7070 Adsl Statistics Report Parameter G7070 Adsl Statistics Report24.POTS Statistics Report Parameter Pots Statistics ReportClearing Media Statistics BRI Statistics Report25.BRI Statistics Report Parameter 27.ARP Table Report Parameter ARP Table ReportBridge For- warding Database Report 26.Route Table Report Parameter29.Bridge Status Report Parameter Bridge Sta- tus ReportPPP Autho Rization Entries Report 28.Bridge Forwarding Database Report ParameterSystem Uptime Report Memory Statistics Reports 30.PPP Authorization Report ParameterSystem Memory Statistics Report Kernel Tasks Memory Statistics Report Zero All StatisticsCLI Help Command Line SyntaxCommand Example Intro- duction Set wan stp bridge2000-A2-GB20-10 222 February Exit Ping Quit Rename file Command Line Interface ReferenceRemove lan ip address Set bridge global Reset systemSet bridge stp global Set dhcp server netbios Set dhcp server domainSet dhcp server range Set dns server address Set ip default route Set ip routeSet lan bridge Set lan ip address Set lan rip on off version 1 2Bcst 2Mlti slot interface port Set mgcp signaling connection slot interface port connection Set mgcp voice tos Set nat None PAP Chap Set sdsl speed Set system defaults Set wan atm ppp authSet wan atm vc Set wan bridge Set wan datalink Set wan framerelay Set wan ip address Set wan stp bridge Description. Displays the Dhcp server configuration 7URXEOHVKRRWLQJDQG Ldjqrvwlfv Diagnostics Performing a Hotline Test Performing a Dialup TestPerforming a Phone Detect Test Performing a Power Supply Test2000-A2-GB20-10 240 February Performing an On/Off Hook Test Sdsl BRI Diagnostics Menu Corrective Action Troubleshooting-Symptoms and CausesTrouble- shooting the IAD Probable CauseProbable Cause Corrective Action If IAD is configured as routerDescription IAD Provisioning ParametersTesting the IAD Power-up Test Opera- tional TestReports Menu Mainte- nance Displaying the Current Configura- tion2000-A2-GB20-10 249 February $0HQX0DS 2000-A2-GB20-10 251 February United Kingdom Australia1 Australia2Germany FranceDenmark Belgium2Italy Table C-1. JetFusion IAD Part Numbers 1 Model Description Equipment ListPart Number 8-Port Table C-2 /4/8-Port Analog Voice FeaturesTable C-1. JetFusion IAD Part Numbers 2 Model Description Table C-4 /4/8-Port Digital Voice Features Table C-3. JF2004i and JF2104i Isdn Voice FeaturesTable C-5 /4/8-Port Data Features SHDSL-TCPAM, SDSL-JF2104i, JF2104, JF2108 Table C-6 /4/8-Port WAN Interface Features 1 DescriptionAdsl G.lite, G.dmt-JF2004 Adsl Annex A, B-JF2004iTable C-6 /4/8-Port WAN Interface Features 2 Table C-8 /4/8-Port Configuration and Management Features Table C-7 /4/8-Port Transport Protocol Features DescriptionFrame Relay Table C-11 /4/8-Port Network Interfaces 1 Table C-9 /4/8-Port Security FeaturesAnalog Table C-12 /24-Port Voice Features16/24-Port Table C-11 /4/8-Port Network Interfaces 2Table C-14 /24-Port WAN Features 1 Table C-13 /24-Port Data FeaturesInterface Frame Relay Table C-14 /24-Port WAN Features 2RQQHFWRU3LQRXWV Table D-1. RS-232 DB-9 Console Port Pin Assignments SignalTable D-7. G.SHDSL Port Pin Assignments RJ11 Line Tip Ring Table D-4 BaseT Connector Pin Assignments SignalTable D-5 BaseT Connector Pin Assignments RJ48 Signal Table D-6. ADSL/SDSL Connector Pin Assignments RJ45 SignalRS-530 RS-449 Table D-8. T1/E1 Connector Pin Assignments SignalPin Signal Table D-9. USI Port for RS-530, V.35 and RS-449 SignalORVVDU\ 2000-A2-GB20-10 269 February 2000-A2-GB20-10 270 February 2000-A2-GB20-10 271 February QGH 2000-A2-GB20-10 273 February 2000-A2-GB20-10 274 February 2000-A2-GB20-10 275 February 2000-A2-GB20-10 276 February 2000-A2-GB20-10 277 February 2000-A2-GB20-10 278 February