Paradyne JetFusion Integrated Access Device manual ATM PCR Configuration Menu

To select CBR, type 1. To select UBR, type 2.

3. The IAD displays the Peak Cell Rate Configuration menu:

Figure 4–44. ATM PCR Configuration Menu

*******************************************

ATM Peak Cell Rate (PCR) Configuration

******************************************

Current line speed for this interface is 1544000 bps Please type a PCR value, or

Press ENTER to accept allowed maximum PCR value for this line speed

Enter Peak Cell Rate (PCR) [3641 cells per second]:

Type the PCR value or press Enter to set the PCR to the maximum rate for the current line speed.

4.The IAD saves the configuration and displays the ATM PVC Configuration menu.

Option 4 (RFC 1483 with VC Muxing) supports routing or bridging.

Setting up RFC 2364 (PPPoATM with LLC Encapsulation) or RFC 2364 (PPPoATM using VC Muxing)

1.Type 6 to select RFC 2364 (PPP0ATM with LLC encapsulation) or type 7 to select RFC 2364 (PPP0ATM with VC Muxing).

2.The IAD displays the current authorization type and a prompt:

PPPAuthorization is currently None Enter New Authorization type:

0.None

1.PAP Client

2.PAP Server

3.CHAP Client

4.CHAP Server

3.If you select options 1 through 4, the IAD displays the current PPP authorization user ID and prompt:

PPPAuthorization Userid is currently grok

Enter New PPP Userid >

Enter the new user ID and press Enter.

4.If you select option 0 (None), the IAD displays the IPCP IP Address Type menu:

Figure 4–45. IPCP Configuration Menu

*******************************************

IPCP IP Address Type Menu

******************************************

1.Static IP Address

2.IPCP Address Assignment

3.WAN Unnumbered IP

Type the option corresponding to the IP address you want to use.

5.The IAD displays the status of the DNS server assignment for the selected port, and prompts you to enable or disable it:

2000-A2-GB20-10 - 80 - February 2004