XS712T Smart Switch
8.Under Multicast Router Expiry Time, specify the number of seconds the VLAN should wait to receive a query before it is removed from the list of VLANs with multicast routers attached.
9.Click Add.
To disable MLD snooping on a VLAN:
1.Select the check box next to each VLAN on which MLD snooping should be disabled.
2.Click Delete.
Multicast Router Configuration
In addition to building and maintaining lists of multicast group memberships, the Snooping switch also maintains a list of multicast routers. When forwarding multicast packets, they should be forwarded on ports that have joined using MLD/IGMP and also on ports on which multicast routers are attached. In MLD/IGMP, there is only one active querier. This means that all other routers on the network are suppressed and are not detectable by the switch. If a query is not received on an interface within a specified length of time (multicast router present expiration time), then that interface is removed from the list of interfaces with multicast routers attached. The multicast router present expiration time is configurable via management. The default value for the multicast router expiration time is zero, which indicates an infinite timeout, that is, no expiration.
To configure the Multicast Router:
1. Select Snooping > Multicast Router Configuration.
2.To configure Multicast Router settings for a physical port, enter the interface and click Go to select that particular interface.
3.Select the interfaces for which you want to configure the CoS settings:
