REMOTE SENSOR CONFIGURATION MENU
The configuration menus allow you to set certain remote sensor operating characteristics to your system or personal require- ments. Two configuration menus are available, User Configuration and Installer Configuration.
User Configuration Menu
Momentarily press 
and 
keys at the same time and release to enter the User menu. To scroll through the menu
items press the 
and 
keys at the same time. To change the item option press 
or 
. To exit the menu scroll through all menu items. If no buttons are pushed for 3 minutes, the control will also return to normal operation. The User Configuration Menu table summarizes the configuration options. An explanation of each option follows.
User configuration menu
Step | Press button(s) | Displayed | Press | or | Comments |
| to scroll menu | (factory default) | to change option |
| |
1 | and | LOCK | on |
| Select keypad lockout OFF or ON |
|
| (OF) |
|
|
|
2 | and | HLD | 1 to 8 hrs |
| Select temporary adjust temperature |
|
| (4h) | in 1 hour increments | hold time | |
3 | and | CALIB | Select temperature display adjustment | ||
|
| (Sensed Temperature) | higher or lower | ||
4 | and | dF | OF |
| Select display temperature OFF or ON |
|
| (on) |
|
|
|
5 | and | dL | OF |
| Select display backlight OFF or ON |
|
| (on) |
|
|
|
6 | and | oF | oC |
| Select temperature display to F or C |
|
| (Sensed Temperature) |
|
|
|
7 | and | _____ | _____ |
| Exits user menu and returns to normal |
|
|
|
|
| operation |
1)Select keypad lockout OFF or ON – Selecting LOCK
ON will cause the keypad to be locked in the normal
operation mode. This prevents the 
and 
from being used to adjust temperature. The display will
indicate "LOCK" when the keypad is locked. If LOCK OF
is selected, the 
and 
keys can still be used.
When the keypad is locked, the 
and 
keys can still be pressed at the same time to enter the configura- tion menu.
2)Select temporary adjust temperature hold time – Selects the length of time for the temporary temperature adjustment. Hold time default is 4 hours and can be set from 1 to 8 hours in 1 hour increments.
3)Select temperature display adjustment higher or lower – allows you to adjust the room temperature display 1° to 4° higher or lower. Your sensor was accu- rately calibrated at the factory but you have the option to
change the display temperature to match your previous sensor or thermostat.
4)Select display temperature OFF or ON – Selecting OF allows you to disable displaying the sensed temperature. Instead of the temperature, the sensor will display "PWR" with the word on to indicate normal operation.
5)Select display backlight OFF or ON
6)Select temperature display to oF or oC - Changes the display readout to Celsius or Fahrenheit as required.
8
