IBM SY44-5902-05 manual Facsimile adapter cable wrap connector wiring

Table 84. Ethernet/IEEE 802.3 transceiver adapter cable and card wrap (continued)

	Adapter connector pin	Wrap connector pin to	Wrap connector pin to
Interface line name	number	pin (normal wrap)	pin (collision wrap)
Data out - circuit shield (DO-S)	11
Data in - circuit A (DI-A)	5	5 to 3
Data in - circuit B (DI-B)	12	12 to 10
Data in - circuit shield (DI-S)	4
Control in - circuit A (CI-A)	2		2 to 3
Control in - circuit B (CI-B)	9		9 to 10
Control in - circuit shield (CI-S)	1
Voltage common (VC)	6		6 to 13
Voltage plus (VP)	13		13 to 6
Voltage shield (VS)	14
Protective ground (PG) (Conductive	Shell
shell)

Facsimile adapter cable wrap connector wiring

Table 85. Facsimile adapter cable wrap connector wiring

Signal designation	Wrap connector port A pin to port B pin
OH/DP to RI	11 to 13
AN1 to AN2	9 to 9
AN2 to AN2	10 to 10
RI to OH/DP	13 to 11
+5V to wrap cable logic	19
DL to country or region code	23 to 14
CLK to CLK Wrap	16 to 18
Country or region code to DL	14 to 23
CLK wrap to CLK	18 to 16
Logic ground to wrap cable logic	7

DDI transceiver adapter cable and card wrap

Table 86. DDI transceiver adapter cable and card wrap

	Adapter connector pin		Wrap connector pin to
Interface line name	number	ICS data connector	pin
Transmit positive (TX+)	5	Red dot	5 to 1
Transmit negative (TX-)	9	Green dot	9 to 6
Receive positive (RX+)	1	Black dot	1 to 5
Receive negative (RX-)	6	Orange dot	6 to 9

Chapter 9. System Architecture and Configuration 265