IBM SY44-5902-05 manual System Architecture and Configuration

Note: For more information on hardware service manager, see Chapter 2, “Hardware Service Manager” on page 45.

When you select the System power control network (SPCN) option on the Hardware Service Manager display, the first System Power Control Network display shows advisory information. It informs you that there might be a delay before the System Power Control Network main menu display appears. You must press the Enter key to continue.

System Power Control Network

Internal processing is being done to display the configuration of the system power control network.

Up to five minutes may be required from the time you press the Enter key at this display.

Press Enter to continue

F3=Exit F12=Cancel

The second System Power Control Network display allows you to choose the frame or rack-mounted unit with which you want to work.

Pressing F5 (Refresh) causes the system to display updated information for the SPCN. For example, if the operator had written new VPD information, pressing F5 would display the newly written VPD information.

Note: SPCN on the 9337 disk unit does not support this function.

Chapter 9. System Architecture and Configuration 233