IBM SY44-5902-05 manual View description function, Hexadecimal Product Activity Log data

Display Address Information for Resource
Serial	Resource
Name	Type	Model	Number	Name
LWS	2661	000	00-00000	CTL01
Physical location:
Frame ID	. . . . . . . :	1
Card Position . . . . . :		5
Device Position . . . . :
Logical address:
SPD bus:
System bus	. . . . . . :	1
System board . . . . . :		0
System card . . . . . . :		2
F3=Exit		F12=Cancel

Figure 44. Example Address Information for Resource

View description function

Press the F11 function key to step through screens to view the following information:

vClass (entry classification)

vLibrary

vLogical address

vPhysical location

vComponent information

vResource name/type

Hexadecimal Product Activity Log data

Use the Display Hexadecimal Report Function or follow the steps below to display hexadecimal error log dump data.

Perform the following:

1.Find an entry in the Product Activity Log for the symptom (SRC) you are using to locate the problem.

a.Select System Service Tools (SST).

If you cannot get to SST, select DST (see “Accessing Dedicated Service Tools” on page 4).

Note: Do not IPL the system to get to DST.

b.On the Service Tools display, select the Start a service tool option (see “Start a service tool” on page 28).

c.Select the Product activity log option on the Start a Service Tool display.

d.Select the Analyze log option on the Product Activity Log display.

e.On the Select Subsystem Data display, select the option to view All Logs.

Chapter 3. Product Activity Log 107