IBM SY44-5902-05 manual Display failed resources, Display hardware contained within package

If the system detects gaps in the logical sequence, the following display appears:

	Display Card Gap Information
			Resource	Card
Description	Type-Model	Frame ID	Name	Position
System Unit	9406-500	1	FR01	2
				6
				7
				8

F3=Exit F5=Refresh F6=Print F12=Cancel

Figure 24. Example Display Card Gap Information display

The Card Position column shows the card location that is empty. One or more card positions might be empty for a single card enclosure.

If no gaps are detected, the following message displays:

No card position gaps were detected in the system

Display failed resources

From packaging displays:

The Failed resources function key is available only on the Logical Hardware Resources displays.

From logical displays:

The Failed resources function is available only under the Logical hardware resources option. This function key displays a list of all failed logical hardware resources. A failed resource indicates that one of the following occurred:

vThere is a problem in the signal path between the system and the device.

vThere is a resource failure.

You can also select the Failed and non-reporting resources option on the Hardware Service Manager display to show failed resources (see “Failed and non-reporting resources” on page 53).

If the system contains no failed resources, the following message displays:

No failed logical hardware resources were found.

Display hardware contained within package

From packaging displays:

70Service Functions V5R2