Hardware Service Manager options

Hardware Service Manager

Attention: This utility is provided for service representative use only.

System unit . . . . . . . : 9406-820 10-4046M

Release . . . . . . . . . : V4R5M0 (1)

Select one of the following:

1.Packaging hardware resources (systems, frames, cards,...)

2.Logical hardware resources (buses, IOPs, controllers,...)

3.Locate resource by resource name

4.Failed and non-reporting hardware resources

5.System power control network (SPCN)

6.Work with service action log

7.Display label location work sheet

8.Device Concurrent Maintenance

Selection
F3=Exit	F6=Print configuration	F9=Display card gap information
F10=Display resources requiring attention		F12=Cancel

Figure 5. Example Hardware Service Manager display for Model 8xx (in the full and limited paging environments)

Note: The system power control network (SPCN) option appears only on systems with SPCN.

The Hardware Service Manager display provides the following information:

vSystem type, model, and serial number

vLicensed Internal Code and operating system release information

For details on how to interpret the Release field, see “Determining the dominant operating system” on page 126.

vA list of the hardware service manager options

The options available vary depending on the system type and paging environment (see “Hardware Service Manager options”).

vFunction keys

The function keys vary depending on the display that is shown. For information on how to use them to collect information, see “Collecting information and performing functions from the Hardware Service Manager displays” on page 61.

For more information on the system configuration and resources, see Chapter 9, “System Architecture and Configuration” on page 229 and “Resource names” on page 242.