IBM SY44-5902-05 manual Condition Description Waiting, Stopping, Stopped, Starting, Formatting

		Work with Communications Traces
Type choice, press Enter.
2=Stop trace		4=Delete trace		6=Format and print trace
7=Display message		8=Restart trace
Configuration
Opt	Object	Type	Trace Description		Protocol	Trace Status
_	LosAngeles	Line	Test LosAngeles Line		SDLC	Active
_	Mpls	NWI	Test Mpls		ISDN	Stopped
_	Tucson	Line	Test Tucson Line		ASYNC	Waiting

F3=Exit	F5=Refresh	F6=Start trace F10=Change size
F11=Display buffer size		F12=Cancel

Details of the trace, including status, are displayed. The trace status can be one of the following:

Condition

Description

Waiting

The trace is waiting for the configuration object to be varied on (not collecting data).

Active The trace data is being collected.

Stopping

The trace is stopping.

Stopped

The trace has stopped (not collecting data).

Error An error occurred on the configuration object while the trace was collecting data. The data might or might not be collected. The trace stopped.

Starting

Trace is being started by another user. You cannot stop or delete this trace.

Formatting

Trace is being formatted.

Starting a trace: The Work with Communications Traces display has a Start trace function key that allows you to select options for tracing data. The following is an example of a Start Trace display:

34Service Functions V5R2