IBM SY44-5902-05 manual Example Hexadecimal Detail Report for Resource

Note: If the SRC you are using occurred more than 24 hours ago, change the “From:” and “To:” Dates and Times from the 24-hour default.

f.Use the defaults on the Select Analysis Report Options display by pressing the Enter key.

g.Find the entry in the Product Activity Log that matches that SRC.

2.Select the Display Detail Report for Resource display. (See the example of this display below.)

Display Detail Report for Resource
			Serial	Resource
Name	Type	Model	Number	Name
STORAGE	6512	001	10-4294009	SI05
Log ID . . . .	. . . . . :	06020132	Sequence	:	2248
Date	. . . . . :	05/20/95	Time	:	08:37:55
Reference code	. . . . . :	3400	Secondary code . . . .	:	00000000
Table ID . . .	. . . . . :	65120001	IPL source/state . . .	:	B/7
Class	. . . . . :	Permanent
System Ref Code	. . . . . :	65123400
I/O processor card detected		device error

Press Enter to continue.
F3=Exit	F6=Hexadecimal report
F9=Address Information	F10=Previous detail report	F12=Cancel

Figure 45. Example Hexadecimal Detail Report for Resource

3.Press F6 to display the hexadecimal report.

The direct select address (DSA) is in the format BBBB-Cc-bb:

vBBBB = hexadecimal offsets 4C and 4D

vCc = hexadecimal offset 51

vbb = hexadecimal offset 4F

108Service Functions V5R2