The Non-reporting resources function key appears on various Logical Hardware Resource displays. It allows you to view a list of the logical resources that were detected in the past but are not being detected by the server now. A non-reporting resource indicates that one of the following occurred:

vThe resource might have been removed from the server.

vThe resource might be powered off.

vThere is a problem in the signal path between the server and the device.

vThere is a resource failure.

You can also select the Failed and non-reporting resources option on the Hardware Service Manager display to show non-reporting resources (see “Failed and non-reporting resources” on page 53).

If no non-reporting resources are detected, one of the following messages is displayed:

No non-reporting logical hardware resources were found.

or

No non-reporting packaging hardware resources were found.

Display resources associated with IOP

From packaging displays:

The Resources associated with IOP option is available only on the Logical Hardware Resources on System Bus display (see “Display system bus resources” on page 79). To access resources associated with the I/O processor, you must select the Logical hardware resources option on the main Hardware Service Manager display, and then select the System bus resources option.

From logical displays:

The Resources associated with IOP option is available only on the Logical Hardware Resources on System Bus display (see “Display system bus resources” on page 79). This option displays the selected IOP and lists all devices that are (logically) attached to it. If more than one IOP is selected, the list contains all the IOPs and their logically-attached resources.

72Service Functions V5R2

Page 86
Image 86
IBM SY44-5902-05 manual Display resources associated with IOP