IBM SY44-5902-05 manual Main storage dump status, Terminating System Reference Code SRC

vDisplay an MSD in the MSD library

vDelete an MSD from the MSD library

vRename an MSD in the MSD library

vCopy an MSD

–From the MSD library to removable media

–From removable media to the MSD library

Follow the instructions on the displays to work with an MSD copy.

			Work with Copies of Main Storage Dumps
Type option, press Enter.
4=Delete		5=Display/Print			7=Rename		8=Copy to media
Opt	ID	Date	Level	System		Description
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________
_	____	________	______	________		________________________________

_____ ________ ______ ________ ________________________________

F3=Exit F9=Copy from media F11=Display copy status F12=Cancel

Main storage dump status

During a main storage dump, the control panel shows MSD status SRCs (D1xx 3xxx and C6xx 44xx). For more information on these SRCs, see “General status SRCs” on page 214.

The main storage dump ends successfully if the Main Storage Dump Occurred display appears. The main storage dump ends unsuccessfully if a terminating SRC appears at the control panel.

Terminating System Reference Code (SRC)

A lit System Attention light indicates dump termination. The terminating SRC displays after the main storage dump completes.

vIn the case of an automatic dump (system stopping, including a main storage dump), the normal terminating SRC is the one associated with the system error that started the dump.

vIn the case of a manual dump (Function 22), the normal terminating SRC is a service processor completion code (A1xx 300x or B1xx xxxx):

MSD status	Function performed
11 xxxx xxxx	System terminating SRC. See “Error recovery
	for dumps” on page 276.

Chapter 10. Working with Storage Dumps 275