IBM SY44-5902-05 manual Tttt Outboard failing unit type number for example, Pxxx

RRRRUnit reference code

ssssSerial number of failing unit

tttt Outboard failing unit type number (for example, 9337)

TTTTType number or card identification number (hex 2xxx through 9FFF)

uuuuUnit specific data

VAdditional SRC information exists

ZZZZReserved

Pxxx	Machine type and model, where P is the machine type and xxx is
	the model:
	v If P=6, the type is 9406
	v If P=4, the type is 9404
	v If P=2, the type is 9402
MIGV EP	General system status

For a description of the SRC, see Chapter 6, “System Reference Code (SRC)

Information” on page 191.

Logical Partition Work with Partition Status System Reference Code Descriptions and Actions: The following B2pp xxxx (where pp=partition ID) system reference codes only appear on the Work with Partitions Status display. They appear only in the Primary partition, and describe error conditions encountered during the IPL sequence of secondary partitions. Press F10 to monitor SRCs. Press F9 to see additional SRCs. Under the Display Partition Information display, there is an option to display SRC history of up to 200 SRCs and their additional words for one or all partitions.

LIC Detected Problem Reference Code Formats:

Table 42. SRC formats when LIC detects a problem

Word	LIC Format 60 Data	LIC Format 61 Data	LIC Format 62 Data
1	A6xx RRRR	B6xx RRRR	B6xx RRRR
2	MIGV EP60	MIGV EP61	MIGV EP62
3	CCCC 0000	cccc cccc	cccc cccc
4	BBBB Ccbb	pppp pppp	pppp pppp
5	@@@@ @@@@	qqqq qqqq	qqqq qqqq
6	TTTT mmmm	qqqq qqqq	qqqq qqqq
7	ssss ssss	qqqq qqqq	BBBB Ccbb
8	NNNN 0000	qqqq qqqq	TTTT mmmm
9	0000 0000	qqqq qqqq	0000 0000

Table 42 represents the formats for Licensed Internal Code (LIC) SRCs.

vFormat 60 is used for LIC Attention SRCs.

vFormat 61 is used when LIC detects a LIC programming problem.

vFormat 62 is used when LIC detects an IOP Bus or IOP programming problem.

RRRRLIC unit reference code (URC).

198Service Functions V5R2