IBM SY44-5902-05 manual Commonly used OS/400 service commands, OS/400 Command Function

Note: To end active jobs running on the facsimile IOP, use the ENDFAXSPT command.

2.If a line, IOP, device, network interface (NWI), or nonprogrammable workstation is hung up, varying its configuration description off, then on (in that sequence) provides recovery for some intermittent problems.

3.You cannot display or change cryptographic resources by using the WRKCFGSTS command. To view these resources, use the Work with Hardware Resources (WRKHDWRSC) command.

Commonly used OS/400 service commands

The following list provides a quick reference to some of the commands that are commonly used in servicing the iSeries server. For more information on some of these service commands, see the iSeries Information Center.

OS/400 Command	Function:
APYPTF	Apply a Program Temporary Fix (PTF)
ANZPRB	Analyze a new problem
CHGMSGQ QSYSOPR *BREAK	Change message to break
CHGSRVA	Change service attributes
CHGNETA	Change network attributes
CHGSYSVAL	Change system values (see 1 on page 303)
CHGXMTLVL	Change transmit level of the facsimile I/O
	processor (see “Change Transmit Level
	(CHGXMTLVL) command” on page 301)
CRTCTLBSC	Create a controller description for a BSC
	controller
CRTCTLLWS	Create local workstation I/O processors
CRTDEVDSP	Create a local display device
CRTDEVPRT	Create a local printer device
CRTDEVSPR	Create a device description for a remote
	display
CRTDEVTAP	Create a local tape device
CRTLINASC	Create a line descriptor for an asynchronous
	line
DLTPRB	Delete all entries in problem log over 30
	days old
DSPJOB	Display a job
DSPJOBLOG	Display the job log
DSPLCLHDW	Display local hardware
DSPLOG QHST	Display the history log
DSPMSG QSYSOPR	Display messages in the system operator’s
	message queue
DSPPFM	Display physical file member
DSPPTF	Display Program Temporary Fixes (PTFs)
DSPSFWRSC	Display software resources
DSPSYSVAL	Display system values (for example, QTIME)
	(see 1 on page 303)

296Service Functions V5R2