IBM SY44-5902-05 manual Word 2 System status information, Status indicators

Table 38. General System Reference Codes (SRCs) (continued)

Problem	SRC	Description
	B9xx xxxx	Operating system machine check (See iSeries OS/400 Diagnostic
		Aids)
Operator	A1xx xxxx	Operation interruption by service processor
intervention
	A6xx xxxx	Operation intervention by LIC
	A9xx xxxx	Operation interruption by operating system
IPL status	C1xx xxxx	IPL status for the service processor
	C2xx xxxx	General status for normal LPAR power on
	C3xx xxxx	IPL status for the system processor
	C5xx xxxx	IPL status for system hardware initialization
	C6xx xxxx	IPL status for LIC
	C6xx 4400	Automatic main storage dump recovery (IPL) status
	C6xx 441x	Automatic power failure recovery (IPL) status
	C6xx 4500 through 4509	DST IPL status
	C9xx xxxx	IPL status for OS/400 operating system program. See iSeries
		OS/400 Diagnostic Aids
General status	D1xx xxxx	General status for the service processor
	D2xx xxxx	General status for normal LPAR power off
	D6xx xxxx	General status for Main Storage Dump Manager, LIC run-time
		status, or LIC power off
	D9xx xxxx	Power down status for OS/400 operating system program. See
		iSeries OS/400 Diagnostic Aids

Word 2 - System status information

Word 2 provides a fixed location for information common to all SRCs shown on the control panel. It is available for all SRC formats except power and control panel. The service processor provides this information at the time the SRC is displayed to the panel.

Notes for status indicators listed below:

1.For the coding of M, Main storage dump indicator, see “Main Storage Dump Indicator (M)”.

2.For the coding of I, IPL state indicator, see “IPL State Indicator (I)” on page 195.

3.For the coding of G, IPL type last initiated indicator, see “IPL Type Last Initiated Indicator (G)” on page 195.

Status indicators

Main Storage Dump Indicator (M): The first hexadecimal digit that is displayed in Word 2 indicates whether the system started a main storage dump and if it was successful. The indicator has the following meanings:

M Description

0Dump was not initiated

1Debug data exists, destructive data only

2Debug data exists, main storage only

3Debug data exists, main storage and destructive data only

4Debug data exists, partial dump (hardware data only)

5Debug data exists, hardware and destructive data only

194Service Functions V5R2