TEMPERATURE CONTROLS
SYSTEM-MONITORING ALARMS
The electronic control system continuously monitors your refrigerator/freezer for temperature consistency and doors left ajar. Variances from normal operating conditions are communicated by audible tones and a set of two status indicator lights.
RESPONDINGTO ALARMS (AUDIBLETONES &
INDICATOR LIGHTS)
Your refrigerator’s control system can convey the following information through audible tones and the alarm indicator lights.
Door | Flashing | Freezer or Fresh Food |
Ajar | Green | door has been open for |
|
| over five minutes. |
|
|
|
Close door to silence and reset alarm.
AIR FILTER INDICATOR & STATUS LIGHTS
Your refrigerator’s fresh food air filter needs to be replaced from time to time. You can monitor the need for replacement by referring to the status light while the air filter is “ON”. To turn on the air filter, press the “Air Filter” button. To turn off the air filter, press the “Air Filter” button. To RESET the air filter, press the “Air Filter” button and hold for 3 seconds.
Air Filter Status Light (not available on all models)
Green | Filter OK. |
|
|
Yellow | Air filter is about 80 percent used. Please order new one. |
|
|
Red | Air filter is 100 percent used. Please change now. |
|
|
TURNINGTHE COOLING SYSTEM ON AND OFF
You can disable the cooling system in your refrigerator by pressing the On/Off button located on the left side of the temperature control panel.
To ensure that you do not accidentally turn off the cooling system, the button does not work unless you press and hold it for three seconds.
While the cooling system is “OFF”, the digital display will show “OF” “OF” for temperature display models and “O” “F” for numeric display models.
Once you disable the cooling system, all refrigeration to the freezer and fresh food compartments stops.
To turn the cooling system back on, you must again press and | Cooling System On/Off Button |
hold the On/Off button for three more seconds. |
|
IMPORTANT
The On/Off button only controls your refrigerator’s cooling system. Power to lights and other electrical components continue unless you unplug the power cord.
9
