IBM SY44-5902-05 manual Save Licensed Internal Code, Work with save storage and restore storage

Save Licensed Internal Code

This option allows you to save the Licensed Internal Code to tape, with all currently applied PTFs. You can use the tape to restore the Licensed Internal Code after a failure.

Note: When your system is in the full or limited paging environment (see “System paging environments” on page 2), the appearance of the Save Licensed Internal Code option varies depending on the operating system. For more information, see Appendix A, “OS/400 Operating System” on page 281.

Work with save storage and restore storage

The Work with save storage and restore storage option allows you to perform the following:

vRestore all system auxiliary storage (except Licensed Internal Code)

vResume a restore storage process that was interrupted

vForce end of an interrupted restore storage process

vResume a save storage process that was interrupted

Note: When your system is in the limited paging environment (see “System paging environments” on page 2), the appearance of the Work with save storage and restore storage option varies depending on the operating system. For more information, see “DST in OS/400 limited paging environment” on page 282.

Work with remote service support

The Work with remote service support option allows you to:

vTest remote service communications

vActivate and deactivate remote service support communication line

vWork with the security log (shows remote service activity)

vChange service attributes

Work with Remote Service Support

Select one of the following:

1.Test remote service communications

2.Activate remote service support communication line

3.Deactivate remote service support communication line

4.Display security log

5.Print Security log

6.Clear security log

7.Change security log retention period

8.Change service attributes

Selection

_

F3=Exit F12=Cancel

Figure 4. Example Work with Remote Service Support Display

40Service Functions V5R2