IBM SY44-5902-05 manual Print, Refresh the display, Remove non-reporting resource information

There are resources with unresolved locations. Press F13 to see list.

Select the Unresolved locations function key to view the Hardware with Unresolved Locations display.

To update or change the location information, select the Change detail option on the Hardware with Unresolved Locations display.

Note: If you take no action, the following applies:

vThe resource does not appear on the packaging resource displays or print-outs. On some resource displays you can press the Unresolved locations function key to view the unresolved locations information.

vThe system operates normally. The information that is requested for these resources is for display purposes only.

From logical displays:

The Unresolved locations function key is available only on the Packaging Hardware Resources displays. To access unresolved location information from the logical displays, you must select the Associated packaging resource(s) option (see “Display associated resources” on page 67).

Print

From packaging and logical displays:

The Print function key produces a printout of the information displayed. You can select this option from various displays.

Select the Print (F6) function key from the Hardware Service Manager display to print the system configuration list. The system configuration list includes system information and the packaging and logical information. For more information on printing the system configuration list, see “Printing the System Configuration List” on page 93.

Refresh the display

From packaging and logical displays:

Select the Refresh function key to access the data again. Use the Refresh function key when a change was made from this display. For example, select this function key if power is restored to a non-reporting resource.

Remove non-reporting resource information

From packaging and logical displays:

The Remove option is available on both the packaging and logical hardware resources displays.

This option allows you to remove non-reporting resources (hardware that has not reported to the system) and user-created frame information. Non-reporting resources are identified with a question mark (?) next to the description field (see “Symbols on the Hardware Service Manager displays” on page 93). For more information on non-reporting resources, see “Display non-reporting resources” on page 71

Chapter 2. Hardware Service Manager 83