IBM SY44-5902-05 manual Setting the ww Position, Setting the xx Position

17.Press the Increment (↑) or Decrement (↓) switch until ** appears next to the function number (61**).

18.Press Enter on the control panel.

You just entered your address into the system. Now use the “Displaying data from function 62” on page 136 procedure to obtain the information from function 62.

Changing the address in functions 58 through 61 (Models 270, 8xx, SB2, SB3, and 890)

Introduction

For this procedure, use the address you were given when you were sent to this procedure. The address consists of 4 bytes.

The ww, xx, yy, and zz represent parts of the address.

Set all 4 bytes of the address (wwxx yyzz) as described in “Changing the address”.

vSet the ww with function 58.

vSet the xx with function 59.

vSet the yy with Function 60.

vSet the zz with Function 61.

Changing the address

Setting the ww Position:

1.Press the Increment (↑) or Decrement (↓) switch until 58 appears in the Function display.

2.Press Enter on the control panel; ** appears next to the function number.

3.Press the Increment (↑) or Decrement (↓) switch until the value of ww appears next to the function number.

4.Press Enter on the control panel.

5.Press the Increment (↑) or Decrement (↓) switch until ** appears next to the function number (58**).

6.Press Enter on the control panel.

Setting the xx Position

1.Press the Increment (↑) or Decrement (↓) buttons until 59 appears in the Function display.

2.Press Enter on the control panel; ** appears next to the function number.

3.Press the Increment (↑) or Decrement (↓) buttons until the value of xx appears next to the function number.

4.Press Enter on the control panel.

5.Press the Increment (↑) or Decrement (↓) buttons until ** appears next to the function number (59**).

6.Press Enter on the control panel.

Setting the yy Position

1.Press the Increment (↑) or Decrement (↓) buttons until 60 appears in the Function display.

2.Press Enter on the control panel; ** appears next to the function number.

Chapter 4. Service Reference Procedures 135