System Reference Codes SRCs | IBM SY44-5902-05 manual

Table 39. IPL type indicator (models 150, 170, 250, 4xx, 50x, 51x, 530, 53S, 6xx, 7xx, SB1,

S20, S30, and S40)
	IPL Type A	IPL Type B	IPL Type C	IPL Type D

Power-on IPL	A	B	C	D

Programmed IPL	1	2	3	4

Function 3 IPL	5	6	7	8

MSD IPL	9	E	F	N/A

Unknown IPL type	0	0	0	0
(Service Processor has
been reset)

A Power-on IPL (first row in the table) includes the IPL that occurs automatically when someone turns on the main power switch or starts power after a power failure. It also includes an IPL started by the timer and a remote IPL started by a communication line.

A Programmed IPL is an IPL that results from the PWRDWNSYS command with Restart=Yes*FULL specified.

A Function 3 IPL uses the selected IPL options to load the system. It is started by selecting Function 03 on the control panel and pressing the Enter key.

Selecting IPL types A or B (type C is reserved) with Function 02 causes an IPL from different areas on the load source DASD. IPL type D is from the alternative load-source device, such as a tape or optical device.

Table 40. IPL Type Indicator (models 270, 8xx, SB2, SB3, and 890)

	IPL Type A	IPL Type B	IPL Type C	IPL Type D
Unknown IPL type	0	0	0	0
(Service Processor has
been reset)

System Reference Codes (SRCs)

Notes:

1.For information about general status SRCs, see “General status SRCs” on page 214.

2.For information about IPL status SRCs, see “IPL status SRCs” on page 201.

3.For detailed information about B6xx LIC SRCs, see iSeries Licensed Internal Code Diagnostic Aids - Volume 1.

4.For detailed information about B9xx OS/400 SRCs, see iSeries OS/400 Diagnostic Aids.

5.For information about other SRCs, see the Problem Analysis information for your system model.

General system and Unit Reference Code (URC) information

System Reference Codes (SRCs)

Attention! This book does not list all SRCs. Start problem analysis with the

Problem Analysis information for your system model.

196Service Functions V5R2

Image 210

IBM SY44-5902-05 manual System Reference Codes SRCs, General system and Unit Reference Code URC information

Contents

ERserver Page ERserver Sixth Edition August Contents Service Reference Initial Program Load IPL Information Appendix A. OS/400 Operating System Trademarks Safety and Environmental Notices Vii Battery Return Program Product Recycling and DisposalEnvironmental Design Safety and Environmental Notices Service Functions V5R2 Conventions and terminology used in this book About Service Functions SY44-5902-03Who should read this book Prerequisite and related information How to send your comments ISeries Navigator Dedicated Service Tools DST Dedicated Service Tools requirementsIntroduction System paging environments Stand-alone paging non-pagingLimited paging Full paging Accessing Dedicated Service Tools Performing an IPL to DST Changing a service tools user ID This ends the procedure Resetting Qsecofr service tools user ID Performing an IPL to DST for secondary partitions Selecting Function 21 while the system Is operational Performing an alternate IPL to DST type D IPL Function keys in DST Exiting Dedicated Service Tools DST optionsPaging environment DST options IPL non-paging Limited Full Perform an IPL Installing Licensed Internal CodeInstalling the operating system Work with Licensed Internal Code Licensed Internal Code general information Options and function keys Work with disk units Options on the Work with Disk Units Display Paging environment Work with disk unit options Paging environment Work with disk unit options Paging environment Work with disk unit options Add units to ASPs and balance data Display disk configurationAdd units to ASPs Work with ASPs threshold Start compression on non-configured disk units Enable remote load-source mirroringDisable remote load-source mirroring Display disk configuration status Delete ASP data Remove units from configurationDelete user ASP Change ASP storage threshold Stop device parity protection Restore disk unit dataStart device parity protection Exclude unit in device parity protection Upgrade load-source utility Recover disk configurationDisk unit problem recovery procedures Replace disk unit Recover from start compression failure Recover unknown load sourceRecover mirrored load source Reclaim IOP cache storage Work with Dedicated Service Tools environment Work with active service tools Resource Name Work with service tools user IDsWork with system devices Selecting Console Type Work with system values Device ID Work with alternate installation device Select DST console modeOptions on the DST Console Mode display Start a service tool Options on the Start a Service Tool display Dump to media Main storage dump manager option allows you to Dedicated Service Tools DST Service Functions V5R2 Options and Function Keys Status Conditions Stopped Condition Description WaitingStopping Starting Start Trace Select the Work with communications traces option Format and print trace Example Format Trace Data Display Data length Record timerRecord number Record status Perform automatic installation of the operating system Controller name/number Work with remote service support option allows you to Work with save storage and restore storageWork with remote service support Save Licensed Internal Code Allowing access for remote service support Activating remote service support Work with system partitions Work with system capacityWork with system security Dedicated Service Tools DST Service Functions V5R2 Hardware Service Manager Hardware Service Manager options Paging environment Hardware service manager options Packaging hardware resources Example Packaging Hardware Resources display Logical hardware resources Locate resource by name Example Logical Hardware Resources display Example Locate Resource By Resource Name display Example Logical Hardware Resource display Failed and non-reporting resources No failed logical hardware resources were found System Power Control Network Spcn Battery power unit information Work with service action log Example Service Action Log Report display Date and time fields Option fieldStatus field SRC field Device concurrent maintenance Display label location work sheet Device resource name Frame IDPosition Frame serial number Time delay needed in minutes Action to be performed Change resource details From packaging displays From logical displays Example Change Packaging Hardware Resource Detail display Concurrent maintenance Example Change Logical Hardware Resource Detail display Create frame information DB1 Example Select Packaging Model display Debug the resource Display address Display associated resources Communications IOA 2620-001 From Hardware Service Manager display Display card gap information Display failed resources Display hardware contained within package Display location information Display non-reporting resources Display resources associated with IOP Display resource details CMB01 Type-model Resource nameDescription Actual type-model Service provider Alternate service nodeAlternate service telephone Location text Manufactured by IBM Shared by multiple systems Display resources requiring attention Example Hardware Resources That Require Attention display Display resource status Example Hardware Resource Attention Message display Display system bus resources From the Logical Hardware Resources display Service Functions V5R2 Example Logical Hardware Resources on System Bus display Display system information Display unresolved locations Remove non-reporting resource information PrintRefresh the display From packaging and logical displays Using High-Speed Link HSL specific options Reserve frame space Display detail BCC02 This display shows the details of an HSL I/O bridge resource Operational Type-modelUnknown Not operational Not Available EnabledDisabled Enabling External Display system informationInternal Link Speed Display port information Example Port Connection Information display Resources associated with loop Example Logical Hardware Associated With HSL Loops display Verify resources SPD02 Symbols on the Hardware Service Manager displays Printing the System Configuration ListSymbol Description This ends the procedure Verification procedures Hardware Service Manager Verify Verify optical storage unit Verify disketteVerify tape Verify communications Communications test descriptions Service Functions V5R2 Product Activity Log Service Action Log SAL Product Activity Log PALUse the Product Activity Log option to Recovering from Product Activity Log errors while in DST Product Activity Log locationPaging environment Options and function keys Analyze log Display or print by log ID Example Select Analysis Report Options display Change Product Activity Log sizes Work with removable media lifetime statistics Symbol Explanation Action Display or print removable media session statisticsSort by ... function Address information function Example Log Summary by Resource Name View description function Hexadecimal Product Activity Log data Example Hexadecimal Detail Report for Resource Example Hexadecimal Report for Resource Resource Type Model Serial number Volume ID Interpreting Product Activity Log reports Resource name Subsystem Possible Names Resource type, model, and location ClassData protection lost System reference code Multiple SRC entries Logical address formatUnit Address Value Unit Address Data Definition Table ID Sequence numberSecondary code IPL source/state Hexadecimal offset Length in bytes Description Srid More information from hexadecimal reports Device Formatting Log Example unformatted information Example Hexadecimal Report, Device Formatting Log Template Array Member Formatting Log Example unformatted information Configuration Formatting Log Example unformatted information Configuration Formatting Log Template Needvalidp N Array Addendum Log Template Service Reference Procedures Setting the system date and time System password Determining the dominant operating system System unique identifier Identifying the consoles when the system is operational Determining a primary or alternative console IntroductionPrimary console requirements Locating the system’s load source from the system console Select the Associated packaging resources option History file Continuously Powered Main Storage CPM Low-level debug and data collecting procedures IntroductionGetting started Following table Function Description Range Introduction Setting the zz Position For PowerPC-based IOPs Setting the ww PositionSetting the yy Position Changing the address Setting the ww Position Setting the xx Position Displaying data from function Logical partitions 137 Determining the release level of a logical partition Locating a secondary partition’s consoleSelect Display partition information Locating a secondary partition’s load source Select Hardware Service ManagerYes No ↓ This ends the procedure Yes No Yes No Closing related problems in other logical partitions Querying logical partition time and dateFinding the SRC history list for a secondary partition Accessing the panel functions of a logical partition Select Work with Partition StatusPress the function key for Include Reference Code Detail Selecting IPL source and mode for a secondary partition Options on the Work with Partition Status displaySelect the Work with system partitions options. option Example of Work with Partitions Status display = Power on 10 = Mode manual = Delayed power off= Mode normal 11 = Mode auto Guest partitions Determining if the system has guest partitions Determining the release level of a guest partitionDetermining the hosting partition of a guest partition Service Reference Procedures Determining the power controlling system of a tower Example Display HSL System Information display Service Functions V5R2 This ends the procedure Switching ownership of a tower’s switchable resources Example I/O Debug Function display Switching the mode of a tower’s switchable resources Example Confirm Ownership Change display Example Confirm Mode Change display This ends the procedure Control Panel Functions Values for IPL types, key modes, and speeds Function code Function selected Disable CPM System status SRC trace Function/data Action or description Displays are F, S, SE, V=F, or V=S Mode combinations AN, BN, CN, DN, AM, BM, CM, DM Function/data Action or description Spcn SRC Formats Function / value Action or description Cancel Request System Power OnFunction / data Action or description Fan Power On Fan Power OffBulk Power Off Bulk Power On Tmmm cccc Service Functions V5R2 Function Subfunction Data Display Service Functions V5R2 Control Panel Functions Control panel functions Models 270, 8xx, SB2, SB3, Ways to access the control panel Models 270, 8xx, SB2, SB3, ISeries control panel without a keystick Customer control panel functions Models 270, 8xx, SB2, SB3, Function 01 on systems with a keystick Press Enter to select the IPL type and exit Current IPL type is displayed with a N S Support-directed procedure only Function Action or description Operations diagram for functions A6 and A8 Fans Power supplies This ends the procedure Extended control panel functions Models 270, 8xx, SB2, SB3 Customer Extended Panel Functions Models 270, 8xx, SB2, SB3 Service Extended Panel Functions Models 270, 8xx, SB2, SB3 5700 Select Function 53 and press Enter to display Control Panel Functions Service Functions V5R2 System Reference Code SRC Information SRC formats Models 270, 8xx, SB2, and SB3 Example SRC record structure all models Identifying SRCs ProblemWord 1 SRC general information Function display Description Status indicators Word 2 System status information Hex Digit IPL State Description System Reference Codes SRCs System Reference Codes SRCsGeneral system and Unit Reference Code URC information IPL Type a IPL Type B IPL Type C IPL Type D Lmmm Lmmm Tttt Outboard failing unit type number for example PxxxRrrr LIC unit reference code URC LIC Unit Reference Code Groups Bbbb CcbbMmmm 441x 20-27440x 4A-4F Spcn informational concurrent maintenance SRCs IPL status SRCs C1xx 100C C100C1xx B1xx C200 11FF C100 D009C200 C200 12FF C200 43FF C200 51FF C200 82FF C200 71FFC200 81FF C3xx LIC is initializing the Load Source IOP messaging functions Initialize RM component process management Authority recovery is running C600 432A C600 432B End of CPM IPL SRCs C600 450A C600 4A60 C600 450CC600 4A57 C600 4B57 C900 29C0 C900 29A0C900 29B0 C900 2A80 C900 2AA0 C900 2A90C900 2A95 C900 2AA1 General status SRCs D6xx D900D900 27C0 Service Functions V5R2 IPL speed recommendations Initial Program Load IPL InformationIPL type, mode, and speed options Methods to perform IPL What is initialized Alternate installation IPLService processor initialization IPL sequence Licensed Internal Code LIC initialization Abnormal ending Initialization output Data descriptionsLog entries Status SRCs Service Functions V5R2 Licensed Internal Code Licensed Internal Code LIC introductionFixes and cumulative PTF packages Licensed programs Cumulative PTF packagesPSP listings Displaying Licensed Internal Code fixes Overview of Licensed Internal Code Install and Restore Code naming conventionsGroup Name Description Utility to install Licensed Internal Code Installing Licensed Internal Code Utility to restore Licensed Internal Code Restoring Licensed Internal Code Authorized Program Analysis Report Apar System Architecture and Configuration 229 System power overview Power supply Battery power unitHardware information Spcn power components Primary nodeSecondary node Spcn menu flow Spcn addressing System Architecture and Configuration Frame Battery capacity testOpt Unit Fault Write Vital Product Data VPD option Display Detail option Cable type for connector J15 Power sequence completeUepo switch Cable type for connector J16 Battery present Next battery capacity test date Last battery capacity test dateLast battery capacity test time Next battery capacity test time Test battery option System Interconnect High Speed Link Multi-adapter bridge Resource names Manager on page 45 and , Product Activity Log on Name Description Example Hardware configuration restrictions High speed communications card and wrap connector wiring Wrap connector pin to pin Connector pin Signal destination Wrap connector pin to pin Cryptographic processor card and wrap connector wiringSignal designation Advanced PCI communications console cable Two-port 232/ac dc Isdn wrap connector and connector pin Wrap connector pin to pin Connector pin Two-port communications adapter cable Two-port communications adapter cable wiring Wrap connector pin to RJ-45 cable wrap connectorCommunications adapter remote power-on cable Description Pin 24/X.21bis communications adapter cable Signal designation Wrap connector pin to pin Stage 1 V.24/X.21bis cable wrap connector wiring24/X.21bis cable wrap connector wiring EIA 232 advanced PCI communications cable EIA 232 advanced wrap connector wiring Signal destination Wrap connector pin to pinStage 1 EIA-232/X.21bis communications adapter cable EIA-232/X.21bis cable wrap connector wiring EIA-232/X.21bis communications adapter cable 36/EIA 449 high speed communications adapter cable Rlsd A, B Stage 1 V.35 cable wrap connector wiring Stage 1 V.35 communications adapter cableAdvanced PCI communications cable Advanced wrap connector wiring 35 advanced wrap connector wiring Cable wrap connector wiring Communications adapter cable35/High speed communications adapter cable 36/RS-449 advanced PCI communications cable 36/RS-449 advanced cable wrap connector wiring DTR-A DSR-A, CD-A 21/High speed communications adapter cable Token-ring communications adapter cable and card wrap Ethernet/IEEE 802.3 transceiver adapter cable and card wrap Facsimile adapter cable wrap connector wiring Signal designation Wrap connector port a pin to port B pinDDI transceiver adapter cable and card wrap PCI communications card wrap connector wiring Unused Communications signal voltage levels Interface type OFF voltage level On voltage level Service Functions V5R2 Working with Storage Dumps Main storage dump introduction Automatic main storage dump Performing a main storage dump to disk manual MSD Copying a main storage dump Work with current main storage dump Copy main storage dump to media Work with copies of main storage dumpsDisplay main storage dump Copy main storage dump to MSD copy Main storage dump status Terminating System Reference Code SRCMSD status Function performed Reporting the error MSD status Additional help Copying the IOP storage dump to removable media All Models IOP dump information in the Product Activity Log All Models Service Functions V5R2 Appendix A. OS/400 Operating System DST in OS/400 full paging environment System Service Tools SST Accessing system service toolsDST in OS/400 limited paging environment Start a service tool Selecting SST from the problem handling optionEntering the Start System Service Tools Strsst command SST options Work with diskette data recovery Work with disk unitsOptions Appendix A. OS/400 Example of Alter Diskette Data display Example of Display Diskette Data display How to use the Work with Diskette Data Recovery option Work with system capacity Function keys SSTWork with system partitions Work with system security Online problem analysis and resolution Introduction System-detected problems Problem log Messages relating to hardware failures Customer-detected problems Service support facility Displaying OS/400 PTFsOS/400 or LIC Apar information ISeries Information Center, Problem Task to be performed What to do Location of instructions Varying configuration descriptions on and off Commonly used OS/400 service commands OS/400 Command Function Endrmtspt Work with System Value Wrksysval Command Wrkhdwprd Service attributes Dspsrva or Chgsrva commands Commonly used service attributesCommonly used system values Chgsrva CRITMSGUSR*QSYSOPR Change Transmit Level Chgxmtlvl command Work with Hardware Products Wrkhdwprd Command Work with Hardware Products display appears Save the system configuration data to the file you created Change Description Label Locations display appears Location Change Description Label display appears Verify commands Commonly used verify commands Procedure Test descriptions Service Functions V5R2 Appendix A. OS/400 External ring test Appendix A. OS/400 Service Functions V5R2 Appendix A. OS/400 Test description Communications tests Wireless LAN adapter card indicatorsCommunications interface trace Status Data Action Concurrent LPDA-2 tests Service Functions V5R2 Appendix A. OS/400 Service Functions V5R2 Appendix B. Notices 321 Trademarks IBM Appendix B. Notices Service Functions V5R2 Glossary of Terms and Abbreviations BAT. See basic assurance test Cpi. See characters per inch EBCDIC. See extended binary-coded decimal interchange code IPL. See initial program load SCS. See SNA character string Type D IPL. See installation IPL Index AER Vfycmn Debug Normal 335 LIC SRCs See Misr PAR 339 See also URCs for Readers’ Comments We’d Like to Hear from You How satisfied are you that the information in this book isPlease tell us how we can improve this book Business Reply Mail Page SY44-5902-05