IBM SY44-5902-05 manual Work with Hardware Products display appears

Perform the following steps before you begin the upgrade:

1.Display and note the IPL type (QIPLTYPE) system value by performing the following:

a.On the command line of the iSeries Main Menu, type wrksysval qipltype and press the Enter key.

b.Type 5 in the qipltype field to display the value. Press the Enter key.

c.Note the information for later use.

2.Display and note the automatic configuration indicator (QAUTOCFG) system value by performing the following:

a.On the command line of the iSeries Main Menu, type wrksysval qautocfg and press the Enter key.

b.Type a 5 in the qautocfg field to display its value.

c.Note the information for later use.

3.On the command line of the iSeries Main Menu, type the following and press the Enter key: wrkhdwprd

4.The Work with Hardware Products display appears.

Select the Display description label locations option and press the Enter key.

5.The Display Description Label Locations display appears. Press the F17 key to create a printout.

Note: You must press the F17 key even if a printer is not available. Pressing the F17 key places a copy of the label locations in the system print spool if a printer is not available. This allows the label locations to print at another time or at another printer location. You can continue by copying the information from the displays onto a piece of paper.

6.Use the Display Description Label Locations printout to verify that all of the system cables and devices are labelled correctly.

Display Description Label Locations

System: xxx

System type-model/serial . . . . . . . : 940x-xxx / xx-xxxxx

--------------Location-------------------
Frame	EIA	Device	Card
ID	Location	Position	Position Port	Label
T1			2	CTL01
T1			3	CTL03
T1			4	BLDG6, CTL02
T1		4		TAP01
T1		5		DKT01
T2			2	TCTCONNECT, TRNLINE
T2			3	TRNBACKUP
T2			4A	QESLINE, QTILINE,
QTIPASLIN
T2			4B	*NONE
T2			5A	SANFRAN
T2			5B	DALLAS
T2			6A	ENDICOTT, LIN003

More ...
F3=Exit	F11=Display types/serial numbers	F12=Cancel
F17=Print

vCable information is in the Label column for each card position.

vDevice information is in the Label column for each device position.

Appendix A. OS/400 303