LIC Unit Reference Code Groups, Bbbb Ccbb, Mmmm

ccccLIC Component Reference Code (CRC). Identifies the LIC component and subcomponent that generated the SRC.

ppppLIC Program Reference Code (PRC). Identifies the LIC class or component that generated the SRC and the specific error detected.

qqqqLIC Program Reference Code Qualifier. SRC words found at functions 15-3 through 19-3 or 15-3 and 16-3, depending on the format, provide additional error isolation information that is specific to the Program Reference Code. One or more of these words may be ‘0000 0000’. Format 61 has up to 5 words of PRC Qualifier, in words 5-9. The PRC determines the number of PRC qualifer words. The content of words 5-9 is dependent on the value in word 4. Format 62 has the PRC qualifier ONLY in words 5-6; there is physical address and type information in words 7-9.

BBBB Ccbb

Bus/Card/Board identifiers of failing component (direct select address)

@@@@Unit address

ssssSerial number of failing unit

TTTTType number or card identification number of failing component (hex 2xxx through 9FFF). May be 0000, if system data is not available at the time the SRC is signaled.

ZZZZReserved

mmmm

Model number of failing component (hex 2xxx through 9FFF). May be 0000, if system data is not available at the time the SRC is signaled.

CCCCCause code

NNNN

Number of disk device facilities missing

MIGV EP

General system status (see Chapter 6, “System Reference Code (SRC) Information” on page 191 for more information.)

xAny hexadecimal number

Notes:

1.For information about Function 11 and 12, refer to Chapter 6, “System Reference Code (SRC) Information” on page 191.

2.Format 60 may contain data in a format other than that shown. Format 60 is an old VLIC format, which some new LIC components use. It does not have the component reference code and program reference code that format 61 and 62 have (61 and 62 were specifically defined for the new LIC). Format 60 is mostly component-specific with no key information to indicate format (the developer has to interpret it). Refer to the Problem Analysis information and perform the problem isolation procedure used by the reference code to further define any significant data.