IBM SY44-5902-05 manual Last battery capacity test date, Last battery capacity test time

Last battery capacity test date

This field gives the date of the last battery test in the format MM/DD/YY.

Last battery capacity test time

This field gives the time of the last battery test in the format HH:MM:SS.

Next battery capacity test date

This field gives the date of the next battery test in the format MM/DD/YY.

Next battery capacity test time

This field gives the time of the next battery test in the format HH:MM:SS.

Power sequence complete

This field indicates whether or not the power sequence is complete. Field values are Yes or No.

Fault

This field indicates whether or not a power or functional fault currently exists. Field values are Yes or No.

Note: The Display status of regulators function key (F6) on the Display Detail for Unit display is not recommended for service representative use.

Display trace log

If you select option 6 (Display trace log) on the System Power Control Network (SPCN) display, the following display appears. It shows the trace log data in both hexadecimal and EBCDIC formats. A message appears at the bottom of the display to indicate (as a hexadecimal number of bytes) the amount of data that is returned

. You can page up and down to see the entire trace log.

Note: It might take minutes to retrieve all the data; how long depends on the size of the trace log.

The Display Data display shows a section of data from the system. The leftmost

Display Data
Data
Offset	-------------	Hexadecimal		--------------	-----EBCDIC-----
0000	00000000	10FFD007 070010FF 04010000
0010	11020400	00001105	0100D537	00000404	N
0020	00C00000	0405000F	00000101	0703000C
0030	01030000	000C0402	0014000C	04020015
0040	00000000	000C0104	00000022	0604931F
0050	00220613	00120032	06060000	003D0603
0060	00000683	06100300	06850504	00010692
0070	06049A20	06920613	000006A2	06060000
0080	00000000	06AD0603	000006AF 061A0600
0090	06AF060A FFFF0B9D		06118521 0B9D060D
00A0	04EC0B9D 060E0597		00030204 0000000C
00B0	02060000	000C0209	0000000C	020C0000
00C0	00000000	000E0403	0014000E	04030015
00D0	00280100	D5370000	040400C0	00000405 ....	N
00E0	000F0000	01010703	000C0103	0000000C

More...

F3=Exit F12=Cancel

00000640 (hex) bytes of data returned. Retrieve trace log buffer successful.

column indicates the offset of this data line from the beginning of the data buffer that is being displayed. The next 4 columns display four, 4-byte hexadecimal numbers that begin at that offset. The last column displays the EBCDIC equivalent of these 16 bytes. Non-displayable characters (characters not part of the National

Chapter 9. System Architecture and Configuration 239