select the Display detail option (see “Display resource details” on page 73) to view the resource status. This indicates the current status of the resource as reported by the hardware.

Status values:

vUnknown - Cannot determine status. The resource may be non-reporting or unable to communicate status.

vOperational - Resource is functioning normally.

vFailed - Resource has failed and is not functional.

vErrors - Card or device has detected errors but may still be functional.

vNot Connected - Functional connection to the card or device has been closed or has failed. For bus resources, this condition indicates that wrap plugs are installed.

vDegraded - Optical bus conditions indicating that the redundant path is being used.

vPowered Off - Resource has been powered off or no power is being supplied to the unit.

vDisabled - Resource has been reset or suspended. This is an I/O processor status to indicate that the IOP is disabled except for bus level service or maintenance (I/O debug functions). To recover from disabled status, perform another IPL on the IOP (see “Debug the resource” on page 66 or “How to reset an I/O processor card while the system is up and running” on page 295).

vSoftware Error — System licensed internal code associated with this hardware resource has incurred a program exception.

Display serial/part numbers, logical address, and status/resource name information

From packaging displays:

You can display serial and part number information on various Packaging Hardware Resources displays by selecting the Display detail option (see “Display resource details” on page 73). To access address and status information from the Packaging Hardware Resources displays, select the Associated logical resource(s) option (see “Display associated resources” on page 67).

The Display serial/part numbers, Display logical address, and Display status/resource name function keys are available only on the Logical Hardware Resources displays.

From logical displays:

The Display serial/part numbers, Display logical address, and Display status/resource name function key is available only on the Logical Hardware Resources on System Bus and Logical Hardware Resources Associated with IOP displays. This function key toggles the display to show serial and part number information, logical address information, or the default status and resource name.

For more information on status, see “Display resource status” on page 78.

Display system bus resources

From the Logical Hardware Resources display:

Chapter 2. Hardware Service Manager 79

Page 93
Image 93
IBM SY44-5902-05 manual Display system bus resources, From the Logical Hardware Resources display