IBM SY44-5902-05 manual Press Enter to select the IPL type and exit

Table 29. Function 02 select IPL type on powered-on systems with a keystick (continued)

Function/data	Action or description
0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _	Press Enter to select the IPL type and exit
	function 02.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0 1 _ _ _ _ _ _ _ _ _ _ _ _ _ _	Use the Increment or Decrement buttons to
	scroll through the control panel functions.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Table 30 shows the sequence of selecting the IPL type and IPL speed on iSeries servers that are powered off.

Table 30. Function 02 select IPL type and IPL speed on powered-off systems with a keystick

Function/Data	Action or Description
0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _	Use Increment or Decrement buttons to scroll
	to function 02.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0 2 _ _ A < _ _ _ _ _ _ V _ _ _	Press Enter to start function 02:
	v The current IPL type is displayed with
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
	pointer.
	v The current IPL speed is displayed.
0 2 _ _ B < _ _ _ _ _ _ V _ _ _	Use the Increment or Decrement buttons to
	scroll through the IPL types and speeds.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0 2 _ _ B _ _ _ _ _ _ _ V _ < _	Press Enter to select the IPL type.
	v The current IPL type is displayed.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
	v The current IPL speed is displayed with a
	pointer.
0 2 _ _ B _ _ _ _ _ _ _ S _ < _	Use the Increment or Decrement buttons to
	scroll through the IPL speeds.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _	Press Enter to select the IPL speed and exit
	function 02.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0 1 _ _ _ _ _ _ _ _ _ _ _ _ _ _	Use the Increment or Decrement buttons to
	scroll through the control panel functions.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Function 02–Select IPL Type, IPL Speed Override, and Logical Key Mode (on Systems without a Keystick): You can use function 02 in either Normal mode or Manual mode. When the system is either powered on or off, this function allows you to select the IPL type and logical key mode. Before you can select the IPL speed override, the system must be powered off.

For powered-on systems without a keystick, function 02 is used to select the IPL mode and logical key mode. Table 31 shows an example of the function 02 IPL type and logical key mode selection sequence for a powered-on system that does not have a keystick.

Table 31. Function 02 select IPL type and logical key mode on powered-on systems without a keystick

Function/data	Action or description
0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _	Use the Increment or Decrement buttons to
	scroll to function 02.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Chapter 5. Control Panel Functions 179