IBM SY44-5902-05 manual Display location information, Display non-reporting resources

The Hardware contained within package option is available only on the Packaging Hardware Resources displays. Use this option to view the next level of hardware for the packaging hardware resources. This option functions only when a plus sign

(+)appears after the description. For more information on symbols, see “Symbols on the Hardware Service Manager displays” on page 93.

From logical displays:

The Display hardware contained within package option is available only on the Packaging Hardware Resources displays. To access this option from the logical displays, you must select the Associated packaging resource(s) option (see “Display associated resources” on page 67).

If the resource is at the lowest level of packaging (contains no other packages), the following message displays:

The selected resource cannot be expanded.

Display location information

From packaging displays:

Each packaging hardware resource has associated location information. To display specific locations, select the Display detail option.

From logical displays:

Location information that appears on the logical displays shows the logical address. Physical location information is available only on the Packaging Hardware Resources displays. To access physical location information from the logical displays, you must select the Associated packaging resource(s) option (see “Display associated resources” on page 67).

Display non-reporting resources

From packaging displays:

The Non-reporting resources function key appears on the Packaging Hardware Resources display (see “Packaging hardware resources” on page 47). It allows you to view a list of the hardware that was detected in the past but is not being detected by the system now. A non-reporting resource indicates that one of the following has occurred:

vThe resource might have been removed from the server. (For more information on removing the resource, see “Remove non-reporting resource information” on page 83.)

vThe resource might be powered off.

vThere is a problem in the signal path between the system and the device.

vThere is a resource failure.

You can also select the Failed and non-reporting resources option on the Hardware Service Manager display to view non-reporting resources (see “Failed and non-reporting resources” on page 53).

From logical displays:

Chapter 2. Hardware Service Manager 71