IBM SY44-5902-05 manual Locate resource by name, Example Logical Hardware Resources display

Logical Hardware Resources

Select one of the following:

1.System bus resources

2.Processor resources

3.Main storage resources

4.High-speed link resources

Selection

F3=Exit F6=Print configuration F12=Cancel

Figure 8. Example Logical Hardware Resources display.

From the Logical Hardware Resources on System Bus display, Display Processor Information display, Display Main Storage Information display, or the Work with High Speed Link (HSL) Resources display, you can perform the following:

vDisplay or change logical hardware resource information

vDisplay associated packaging hardware resources

vDisplay logical hardware resource status

Note:

vThe System bus resources option also allows you to perform I/O debug functions and run verification procedures. For more information on this option, see “Display system bus resources” on page 79.

The High-speed link resources display also allows you to enable and disable HSL Opticonnect and to display port information.

For more information on collecting information and performing specific functions using the options and function keys from the Logical Hardware Resources display, see “Collecting information and performing functions from the Hardware Service Manager displays” on page 61.

For details on the symbols that appear next to the resource description field, see “Symbols on the Hardware Service Manager displays” on page 93.

Locate resource by name

The Locate resource by resource name option appears on the Hardware Service Manager display when the system is in the full or limited paging environment. It allows you to enter a resource name on the Locate Resource by Resource Name display:

50Service Functions V5R2