Function keys SST, Work with system partitions

and data set headers; therefore, you might want summary reports for these areas. If you find read errors, you should look at the failing sector summary. For diskettes that are used in save and restore operations, use the load and dump object dump descriptor summary.

6.If you want to print the sector range report, specify the start and end sector address for the sector range. If you do not specify a sector address, no sectors will print in the print range sector area of the report.

7.To display the contents of the diskette, select the Display diskette data option on the Work with Diskette Data Recovery display.

To change the failing sectors, select the Alter diskette data option on the Work with Diskette Data Recovery display.

8.Exchange the diskette that contains CRC errors with one of the same type and format.

9.Select the Write data to diskette option on the Work with Diskette Data Recovery display to write the changed data to the new diskette.

This ends the procedure.

Work with system partitions

For information on the Work with system partitions options, see “Work with system partitions” on page 42.

Note: Some functions are restricted to DST use only and cannot be performed from SST.

Work with system capacity

For more information on the Work with system capacity option, see “Work with system capacity” on page 42.

Note: Some functions are restricted to DST use only and cannot be performed from SST.

Work with system security

For more information on the Work with system security option, see “Work with system security” on page 42.

Note: Some functions are restricted to DST use only and cannot be performed from SST.

Work with service tools user IDs

For more information on the Work with service tools user IDs option, see “Work with service tools user IDs” on page 25.

Note: Some functions are restricted to DST use only and cannot be performed from SST.