IBM SY44-5902-05 manual Example Locate Resource By Resource Name display

Locate Resource By Resource Name

Type resource name to be located, press Enter.

Resource name . . . . . . . . . .

F3=Exit F9=Unmapped Resource Names F12=Cancel

Figure 9. Example Locate Resource By Resource Name display

The system responds by displaying one of the following messages:

vResource is not found.

The system displays the following message:

x does not exist as a current resource name.

(Where x is the resource name that the user specified.)

vResource is found but is a reserved resource name.

A reserved resource name is created when an OS/400 command (CRTDEVx) supplies an unassigned resource name. The following message displays:

x exists as a reserved resource name. Resource does not exist.

(Where x is the resource name that the user specified.)

vResource is found. If the resource name represents a logical hardware resource, the Logical Hardware Resources display appears. It allows you to work with the logical hardware resource. The resource name in the following example is CC02.

Chapter 2. Hardware Service Manager 51