Secondary Installation
Figure 73. Third Stage Log Set Installation.
Figure 74. Fourth Stage Log Set Installation.
Figure 75. Fifth Stage Log Set Installation.
Figure 73: The center of the right log fits onto the locator pin on the back right log (see Figure 72). The front of the log is to rest on the burner and the back end of the log rests on the back brick panel. Ensure the log does not block any burn ports.
Figure 74: The center of the front log fits onto the two (2) locator pins on the valve cover tray (see Figure 73).
Figure 75: Place the ember chunks and ember wool irregularly onto and around the front of the burner to create a realistic look. The ember wool comes in chunks that can be ripped into smaller pieces. The front log has been removed for clarity. See Figure 76 for complete log and ember set-up with the front log.
WARNINGS: DO NOT pack this ember material as this could create an unsafe condition. The pieces should be lightly placed so they don’t block any of the burner ports.
DO NOT allow any of the embers to rest against the pilot assembly.
Caution: Use only the type of ember material supplied with this fireplace. Due to the irregular size of the ember material, there may be more than required. Use of other foreign materials on the burners may create dangerous conditions.
34
