HP xw6000 manual Diskette MBR Validation

Setup Utilities and Diagnostic Features

Heading	Option		Description (Continued)
Storage	Options	Diskette MBR Validation
(continued)	(continued)	Allows you to enable or disable strict validation of the diskette
		Master Boot Record (MBR).
		✎	If you use a bootable diskette image that you know to be
			valid, and it does not boot with Diskette MBR Validation
			enabled, you may need to disable this option in order to use
			the diskette.
	DPS Self-Test	Allows you to execute self-tests on IDE hard drives capable of
		performing the Drive Protection System (DPS) self-tests.
		✎	This selection will only appear when at least one drive
			capable of performing the IDE DPS self-tests is attached to the
			system.
	Controller Order	Allows you to specify the order of the attached hard drive
		controllers. The first hard drive controller in the order will have
		priority in the boot sequence and will be recognized as drive C
		(if any devices are attached.
		The selection will not appear if all hard drives are attached to
		the embedded IDE controllers.
	SCSI Narrow	Allows you to configure SCSI termination on the external SCSI
	Termination	connector for narrow SCSI drives. The feature should only be
		enabled if using a narrow SCSI drive to terminate the external
		SCSI channel.
	Boot Order	Allows you to specify boot order of installed peripheral devices
		(such as LS-120 drive, diskette drive, hard drive, SCSI drive,
		CD-ROM drive, or DVD-ROM drive).
Security	Setup Password	Enables setup (administrator) password.
		See Section 3.4, “Asset Tracking and Security,” for more
		information.
	Power-On	Enables power-on password.
	Password	See Section 3.4, “Asset Tracking and Security,” for more
		information.
	Password	Enables/disables network server mode.
	Options	Specifies prompting for power-on password.
		See Section 3.4, “Asset Tracking and Security,” for more
		information.
		This selection will appear only if a power-on password is set
		and the network server mode is disabled.
	Smart Cover	Enables/disables Smart Cover Sensor and Cover Lock. (Feature
		supported on select models only.)

Lists most recent cover removal. (Feature supported on select models only.)

See Section 3.4, “Asset Tracking and Security,” for more information.

2–6 Service Reference Guide