IM PORTANT NOTES
•Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas.
•Operate controls and switches as described in the manual.
•Before turning on the power, make certain that the power cord is properly installed.
•When moving the set, be sure to first disconnect the AC power cord.
This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
POWER SOURCE
This clock is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the clock on any other power source. You could cause damage to the clock that is not covered by your warranty.
This clock should be connected to an AC outlet that is always ‘live’. Do not connect it to an outlet that is controlled by a wall switch. When the power to the clock is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the life of the lithium battery keep the clock connected to a ‘live’AC outlet at all times
You will note that this system is equipped with a polarized AC power plug having one blade wider than the other. This is a safety feature. If this plug does not fit into your existing AC outlet, do not try to defeat this
safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fit into
your outlet, you probably have an
outlet changed by a qualified licensed electrician.
AC Plug
2
AC100_072806.p65 | 2 |
28/7/2006, 10:32