Curtis KCR2609 owner manual To set up a CD playlist, To edit a CD playlist, To cancel a playlist

OP E R AT ING INS T R UC T IONS

To set up a CD playlist:

1.Press the POWER Button to turn on your radio, then Press the FUNCTION Button one or more times until "--" appears on the display.

2.Insert a CD into the CD tray. If the CD starts playing, press the STOP Button.

3.Press the MEM/CLK SET Button. "PROG 0" appears on the display.

4.Press one of the SKIP/TUNING Buttons one or more times to select the first track you want to program.

5.Press the MEM/CLK SET Button to confirm your selection.

6.Repeat Step 4 and 5 to add more tracks to your playlist.

7.Maximum can store up to 20 tracks.

8.When you have finished creating your playlist, press the PLAY/PAUSE Button to start playing your playlist.

To edit a CD playlist:

1.While the CD is playing, press the STOP Button to stop playback.

2.Press the MEM/CLK SET Button to select one of the programmed tracks.

3.Press one of the SKIP/TUNING Buttons one or more times to select a new track you want to program.

4.Repeat Steps 2 and 3 to edit aditional track selections.

To cancel a playlist:

While the CD is playing, do one of the following:

*Press the STOP Button twice.

*Press the FUNCTION Button.

*Press the OPEN/CLOSE Button to open the CD tray.

*Press the POWER Button to turn off your radio.

To repeat a track or an entire CD:

1.Press the POWER Button to turn on your radio.

2.Press the FUNCTION Button one or more times until "--" appears on the display.

3.Press the OPEN/CLOSE Button to open the CD tray.

4.Place a CD with the label side up in the tracy, then press the OPEN/CLOSE button to close the tray.

5.Press the PLAY/PAUSE Button to start playback.

10