Philips AJ100/37B owner manual Setting the Clock, Tuning to Radio Statons

Page 10

The brightness of the display can be adjusted: Bright Low Off Bright .

SETTING THE CLOCK

The time is displayed using the 24-hour clock.

1.Check the radio is switched off.

2.Press SET TIME to enter the clock setting mode.

3.Hold down or press HR + or MIN + repeatedly to set and adjust the hours and minutes respectively. Release HR + or MIN + when you have reached the correct setting.

4.Press SET TIME to confirm.

RADIO

1Press RADIO ON/OFF once to switch on the radio.

Display shows the radio frequency of the last selected waveband briefly before returning to the clock time. Your preset station is also shown if you

are listening to a preset. (See 2)

2Adjust the sound using VOLUME.

3To select preset stations, press the respective PRESET button (1-5) once or

repeatedly.

4Press RADIO ON/OFF to switch off.

TUNING TO RADIO STATONS

Automatic tuning

• Press TUNING +/- one second or more to tune to your station. ™The radio automatically tunes to a station of sufficient reception.

Manual tuning

• Press TUNING +/- briefly or repeatedly until you reach the desired frequency.

To improve reception:

For FM, extend and position the pigtail fully to obtain optimum reception.

Image 10
Contents Clock Radio Page Page Benefits AdditionalOwnership Important Safety Instructions Philips Limited Warranty ONE 1 Year Enviromental Information Alarm Reset / Sleep Supplied AccessoriesRadio ON/OFF SELF-POWERED BACK-UP Power SupplyBasic Features Tuning to Radio Statons Setting the ClockRadio Using the Alarm General Storing and Using Preset StationsSetting the Alarm Time and Mode See Press Alarm Reset / Sleep Switching OFF the AlarmHour Alarm Reset Repeat AlarmMaintenance & Safety Setting and switching off SleepSleep See About Sleep Troubleshooting Philips Consumer Electronics Company