Clock and Sleep Timer | Alarm | Radio |
Setting the Clock | Setting the Alarm | Tuning the AM or FM Radio |
1.Press the Power button to turn the unit off.
2.Press and hold the Stop/Clock button until the display begins to blink, then release the button.
3.Press the Tune +/- buttons to adjust the hour.
The PM indicator will light when the hour is set in the PM.
4.Press the Stop/Clock button.
5.Press the Tune +/- buttons to adjust the minute.
6.Press the Stop/Clock button to finish setting the time.
Setting the Sleep Timer
1.Follow the instructions for Setting the Clock.
2.Press the Snooze/Sleep button repeatedly to set the sleep timer ( 90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF ).
3.Once the set sleep time has expired the clock radio will automatically power off.
CD
Loading a CD
1.Open the CD Door.
2.Place a CD into the boombox, label side facing up.
3.Close the CD Door.
Playing a CD
1.Follow the instructions for Loading a CD.
2.Press the Source button to switch to CD mode.
3.Press the Play/Pause button to begin playing the loaded CD.
Programming a CD
1.Follow the instructions for Loading a CD and Playing a CD.
2.Press the Stop button to stop the CD during play.
3.Press the Program button.
“1--” will begin to blink on the display.
4.Press the Tune +/- buttons to select a track.
5.Press the Program button to save the selected track to the program.
6.Repeat steps 4 and 5 to program up to 20 tracks.
1.Press the Power button to turn the unit off.
2.Press and hold the Al1 or Al2 button until the display begins to blink, then release the button.
3.Press the Tune +/- buttons to adjust the hour.
The PM indicator will light when the hour is set in the PM.
4.Press the the Al1 or Al2 button.
5.Press the Tune +/- buttons to adjust the minute.
6.Press the the Al1 or Al2 button.
7.Press the Tune +/- buttons to switch between Buzzer, AM
Radio, FM Radio and CD.
The display will indicate the following:
Use the Vol+/- buttons to adjust the volume of the alarm, except when set to Buzzer.
8.Once the set alarm time is reached, the alarm will sound.
To set the other alarm, follow the above steps and choose the alarm not currently set.
Cancelling the Alarm
1.Follow the instructions for Setting the Alarm.
2.Press the Al1 or Al2 button until the indicator is no longer lit.
Snooze and Alarm Reset After the alarm sounds:
Press the Snooze/Dimmer button to delay the alarm for several minutes.
OR
Press the Power button to turn the alarm off until the set alarm time is reached again.
AUX input
Using the Audio Input
Requires a 3.5mm audio cable (not included).
1.Connect a 3.5mm audio cable to the
AUX Input and the audio output on an MP3 player or other audio device.
2.Press the Source button to switch to AUX mode.
3.Use the native controls on the connected MP3 player or other audio source to play your audio through the CD Clock Radio.
1.Press the Power button to turn the unit on.
2.Press the Source button to switch between the AM and FM radio mode.
3.Press the Tune +/- buttons to adjust the radio to the desired frequency.
4.Press and hold the Tune +/- buttons to search for the next available frequency.
5.Press the Vol+/- buttons to adjust the volume.
6.Press the Power to turn the radio off.
Saving a Station as a Preset
1.Follow the instructions for Tuning the AM or FM Radio.
2.Tune to the desired station.
3.Press the Al 2/Program button. The display will flash.
4.Press the Tune +/- buttons to set as P1
- P10.
5.Press the Al 2 /Program to finish setting the station as a preset.
Tuning to a Preset Radio Station
1.Follow the instructions for Tuning the Radio and Saving a Station as a Preset.
2.Press the Play/Pause/Mem+ button to cycle through preset radio stations.
Radio Reception
Extend the FM Antenna to improve FM radio reception.
An AM antenna is built into the clock radio. To improve AM radio reception, adjust the position of the clock radio.
USB
Charging a Device with the USB Port
Requires a USB cable (not included).
1.Make sure the unit is plugged into the wall.
2.Using the appropriate USB charging cable (not included), connect one end to the device and the other
to the USB Port on the unit.
Refer to the user’s manual for your specific device for manufacturers required charging amperage as well as determining the appropriate cable for your device before charging.
3.The device will now charge.
Note: Refer to the user’s manual for your specific device for manufacturers required charging amperage.
International Support
To download this User’s Guide in | Para descargar este Manual del |
English, Spanish, or French, or to get | Usuario en inglés, español y francés, o |
answers to frequently asked questions, | para obtener respuestas a preguntas |
visit the support section at: | frecuentes, visite la sección de apoyo en |
www.gpx.com | www.gpx.com |
For Warranty Information and the most
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français,
ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur
www.gpx.com
Customer Service: 1-888-999-4215
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.