GPX KC220S2 manual Loading a CD, Playing a CD, Programming a CD, Playing the Radio

Page 10

CD AND RADIO

Loading a CD

1Press the POWER button to turn the under cabinet music system on.

2Press the SOURCE button to switch to CD MODE.

CD MODE is indicated on the display by two blinking dashes “ - -”, and eventually track numbers.

3Press the OPEN/CLOSE button to open the CD drawer.

4Load a CD into the CD drawer, label side facing up.

Playing a CD

1Follow the instructions for LOADING A CD.

2After the power is on, the music system is in CD MODE, and the CD is loaded, press the PLAY/PAUSE button to begin playing a loaded CD.

Programming a CD

1Follow the instructions for LOADING A CD.

2After the power is on, the music system is in CD MODE, and the CD is loaded, press the STOP button.

3Press the PROG/CLKSET button.

“01”, indicating the current program track, will begin flashing on the display.

4Press the SKIP/SEARCH buttons to select the CD track you would like to play in the program.

5Press the PROG/CLKSET button.

6Repeat steps 3, 4, and 5 to continue programming CD tracks.

Up to 20 tracks can be programmed.

7Press the PLAY/PAUSE button to begin playing the programmed CD.

8To cancel a program, press the STOP  button twice.

Playing the Radio

1Press the POWER button to turn the under cabinet music system on.

2Press the SOURCE button to switch to RADIO MODE.

RADIO MODE is indicated by “AM” or “FM” on the display.

3Press the STOP button to switch between AM and FM radio.

4Turn the TUNING dial on the side of the under cabinet music system to tune the AM or FM radio.

10 GPX KC220S

Image 10
Contents KC220S Important Safety Instructions FCC Warnings Features IncludedTable of Contents Introduction OPEN/CLOSE Remote PowerMounting Under a Cabinet Setting the Clock Programming a CD Loading a CDPlaying a CD Playing the RadioPlaying Audio from the Line Input Connecting the Line InputTurn the Device Cradle so that it faces out Company Information