GPX KC220S2 manual Playing Audio from the Line Input, Connecting the Line Input

Page 11

Playing Audio from the Line Input

1Follow the instructions for

CONNECTING THE LINE INPUT.

2Press the POWER button to turn the under cabinet music system on.

3Press the SOURCE button to switch to AUX MODE.

4AUX MODE is indicated by “AUX” on the display.

5Use the controls on the device connected to the LINE INPUT CABLE to begin playing audio.

6Use the VOLUME buttons on the under cabinet music system to control the volume output.

LINE INPUT

Connecting the Line Input

1After the under cabinet music system is securely mounted, gently pull down the hidden DEVICE CRADLE from the bottom of the music system.

2Turn the DEVICE CRADLE so that it faces out.

The DEVICE CRADLE will not turn 360 degrees

3Place an iPod or MP3 player into the

DEVICE CRADLE.

iPod Touch devices are the most suitable fit.

4Pull out the retractable LINE INPUT CABLE from behind the cradle and connect it to the stereo headphone jack on an iPod or MP3 player.

Using too much force to pull out the LINE INPUT CABLE can result in damage to the cable.

CUSTOMER HELPLINE 1-314-621-2881

GPX KC220S 11

Image 11
Contents KC220S Important Safety Instructions FCC Warnings Included FeaturesTable of Contents Introduction OPEN/CLOSE Mounting Under a Cabinet PowerRemote Setting the Clock Playing the Radio Loading a CDPlaying a CD Programming a CDTurn the Device Cradle so that it faces out Connecting the Line InputPlaying Audio from the Line Input Company Information