Alarm
Setting the Alarm
The alarm must be set at least 10 minutes before the actual alarm time is reached in order for the gradual light to turn on.
1.Press the AL SET button to view the alarm time.
2.Press and hold the AL SET button. The hour will begin to blink.
3.Press the LIGHT±/TIME± buttons to adjust the hour.
The PM indicator will light when the hour is set in the PM.
4.Press the AL SET button.
The minutes will begin to blink.
5.Press the LIGHT±/TIME± buttons to adjust the minute.
6.Press the AL SET button. The light will come on.
7.Press the LIGHT±/TIME± buttons to set the brightness of the light when the alarm sounds.
8.Press the AL SET button.
9.Press the LIGHT±/TIME± buttons to switch between AL RADIO and
AL BUZZ.
10.Press the AL SET button to finish setting the alarm.
11.Once the set alarm time is reached, the alarm will sound.
Snooze and Alarm Reset
After the alarm sounds:
Press the SNOOZE button to delay the alarm for an additional 9 minutes.
OR
Press the POWER/AL RESET button to turn the alarm off until the set alarm time is reached again.
10 GPX