GPX 1514-0322-10, C280 manual Introduction, PM Indicator

Page 6

Introduction

PM INDICATOR

AM/FM FREQUENCY

AL BUZZ INDICATOR

Lights when the current

DISPLAY

Lights when the alarm

time is in the PM.

 

is on and set to buzzer.

AL RADIO INDICATOR Lights when the alarm is on and set to radio.

POWER/AL RESET Press to power the clock radio off or on. After the alarm sounds, press to turn the alarm off until the set alarm time is reached again.

SNOOZE/DIMMER Press to snooze the alarm after it sounds. Press to adjust the brightness of the LCD display.

AL SET Press to view the alarm time. With the alarm time on display, press and hold to set the alarm time.

LIGHT ON/OFF Press to turn the built-in light off or on.

LIGHT ±/TIME± With the light turned on, press to adjust the brightness. Press to adjust the time when setting the clock or alarm.

DC POWER INPUT

3.5mm LINE INPUT

FM WIRE ANTENNA

AM/FM Press to switch between AM and FM radio mode.

CLK SET

With the power off, press and hold to set the time.

SLEEP

Press repeatedly to set

the sleep timer.

6GPX

Image 6
Contents C280 GPX FCC Warnings Additional WarningsFeatures Sunrise Clock RadioIncluded Setting the Clock Sleep Timer Features IncludedPower Battery Backup Setting the Alarm Snooze and Alarm ResetPM Indicator IntroductionTuning Setup PowerPress the LIGHT±/TIME± buttons to adjust the minute Setting the ClockPress the LIGHT±/TIME± buttons to adjust the hour ClockAlarm Setting the AlarmRadio & Line Input Requires a 3.5mm line input cable not includedCompany Information Green InitiativeInternational Support Contact Information