Listening to the Radio (Continued)
Programming Radio Station Settings (Continued)
5. While the Preset Station Number is flashing, press the Radio Preset Buttons until the display shows the slot number you wish to store the station as. There are 12 FM and six AM slots to choose from.
6.Press the Memory Set Button again to save the setting. The station can now be accessed using the Tuning/Set Buttons, as described in the Listening to the Radio section of the instructions.
7.Follow the above instructions to continue programming station settings into memory.
8.To edit a setting, enter a different station as an existing Preset Station Number. This overrides the original.
Sleeping to Radio With Timer
Note: For more information about playing the radio, see the Listening to the Radio section of this manual.
1.Press the On/Sleep Button twice to enter the sleep mode.
2.Continue pressing the On/Sleep Button to select a
sleep time. When the display shows the desired sleep time, stop pressing the button. The sleep timer setting remains active for approximately ten seconds before returning to the standard clock display. The Sleep Indicator will appear, showing that the radio timer has been activated.
3. Select a radio station using the AM/FM Radio Button and the Tuning/Set Buttons.
4.Press the Sleep Volume Button to adjust the sleep volume to a comfortable level without affecting the alarm volume. The Sleep Volume Indicator will show the current sleep volume level. Turning the Volume Thumbwheel will also adjust the sleep volume.
5.The radio will play for the programmed sleep time and then shut off. To check how
much sleep time is remaining, press the On/Sleep Button once.
6. To turn off the radio before the sleep time has elapsed, press the Off/Reset Button.
Antenna Information and Adjustment
FM – Extend the FM wire antenna to its full length and vary the direction to its strongest signal.
AM – The AM bar antenna is located inside the cabinet. Rotate the unit until you find the strongest AM signal.
Last Station Memory
The tuner always remembers the last station selected before the radio was switched off, and automatically selects the station again when the radio is turned on.
11