Auto-Set and Manual Time and Date Settings

Auto-Set Time and Date Settings

This model is equipped with the Auto-Set feature, meaning that the time and date settings have been programmed at the factory and will already be set when you first plug the model in. Auto-Set will automatically adjust the time and date settings for daylight-saving time and leap years. Auto-Set is programmed for Eastern Standard Time; if you do not live in this time zone, you can easily switch the setting to one of six other time zones.

1. To change your time zone setting, press the Time Zone Button. The current Auto- Set Time Zone in the upper-right-hand corner of the display will flash for approximately ten seconds, after which the display will revert to the standard clock display.

2. While the Auto-Set Time Zone is flashing, press the Tuning/Set Buttons to select your time zone. The display will show each zone’s current time setting. There are seven time zones to choose from:

Auto-Set Time Zones

Z-01---------------	> Atlantic Standard Time
Z-02---------------	> Eastern Standard Time
Z-03---------------	> Central Standard Time
Z-04---------------	> Mountain Standard Time
Z-05---------------	> Pacific Standard Time
Z-06---------------	> Alaskan Standard Time
Z-07---------------	> Hawaiian Standard Time

3. When you have reached your time zone, press the Time Zone Button to lock the setting into place.

Manual Time and Date Settings

1.To change your time setting, press the Time Set Button so that the clock display begins flashing.

2.While the display is flashing, press the Tuning/Set Buttons to set the time. Hold a button for a few seconds to advance the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.

3. When you have set the current time, press the Time Set Button again to return to the standard display.

4.To change your date setting, press the Date/7-5-2 Button. The display will show the calendar setting.

5. The display will show the flashing year. Press the Tuning/Set Buttons to set the current year. When you have selected the year, press the Date/7-5-2 Button again and follow the above instructions to set the month, and then the day.

6.After you have set the date, press the Date/7-5-2 Button again to return to the standard display.