OWNER'S MANUAL
FRAME ASSEMBLY
68
64
56
1
29
28
NOTE:
-WRENCH TIGHTEN HARDWARE TO SECURE (28).
-NOW THE HARDWARE FROM PAGE 1O NEEDS TO BE TIGHTENED IN SEQUENCE TO ALIGN THE SHAFTS. MOVE (1) TO THE MIDDLE OF SHAFT (28) AND
-MOVE (1) ALONG THE SHAFTS TO ONE END AND
TO THE OPPOSITE END AND TIGHTEN THAT BOLT.
-MOVE (1) BACK AND FORTH ALONG THE SHAFT TO CHECK FOR SMOOTHNESS OF OPERATION AND
-WRENCH TIGHTEN ALL HARDWARE AFTER THE SHAFTS ARE PROPERLY ALIGNED.
-REPEAT ASSEMBLY FOR OPPOSITE SIDE.
-SOME PARTS MAY HAVE BEEN REMOVED FOR CLARITY.
58
34 66
PAGE 11 |