Panasonic SV-PT1PP operating instructions Copy Mode Liquid Crystal Display

Warning and Instruction Displays

Copy Mode (Liquid Crystal Display)

Indications	Condition
PLEASE	Insert battery. Power will not turn on without battery
INSERT BATT.	inserted.
NO CARD	Insert the card.
NO DATA	No data is stored on the card.
	An error has occurred during initialization of the
	HDD/PC Card. Turn off the power, then reinsert the
INIT ERROR	card. If error occurs again, format the card (p. 23),
	then reinsert it. If error still occurs, card may be
	damaged.
FORMAT ERROR	An error occurred during card formatting.
	Re-insert card and format again. (pp. 22, 23)
	Insufficient free space on the copy destination disk.
NO CAPACITY	Delete unnecessary files, or insert a card with
	sufficient free space.
	The card is protected. Cancel the protection to
CARD PROTECT	resume operation. Refer to documentation provided
	with the card.
COPY ERROR	An error occurred during copying. Press any key,
	then reset the unit (p. 52), or turn the power off,
HIT ANY KEY
	then back on again and repeat copying operation.
SAFETY MODE	The HDD SAFETY Detection Switch has activated
	and the HDD has stopped for protection. Place the
PUT IT DOWN
	unit on a flat, level surface.
CAN’T USE	SD Memory Cards formatted to FAT32 specifications
	cannot be used. “Format?” will be displayed. Transfer
FAT32 SDCARD
	desired files to PC, then format the card. (pp. 22, 23)
CAN’T COPY	Secure data files (audio files that include copyright
SECURE FILES	restrictions) cannot be copied.
BATTERY LOW	The battery is spent. Copy operation will stop and
	power will turn off. Recharge the battery.
COPY CANCEL	The battery is spent. The copy operation will be
	canceled and the power will turn off. Then recharge
BATTERY LOW
	the battery.
PC CARD	The PC Card cannot be formatted.
CAN’T FORMAT

50