Panasonic SV-PT1PP Operating Precautions, Safety precautions, To avoid damage to the Battery

Page 8

Operating Precautions

Carefully read these precautions prior to use and strictly observe them during unit operation. Failure to do so may result in product malfunction or damage. Also, disregarding these precautions could cause damage to, or loss of, data stored within the media.

Do not leave this unit in direct sunlight, inside tightly closed vehicles, in extremely hot or cold places, or near heaters or air conditioners. Avoid rapid temperature changes.

Operate unit well away from magnetic or electromagnetic wave sources (e.g. microwave ovens, TVs, game devices, portable telephones, etc.) as stored data may be lost or distorted.

Do not let volatile substances, such as insecticides, come in contact with this unit as it could seriously damage the unit’s exterior finish.

Do not allow this unit to remain in dusty locations. If dust enters this unit, request an inspection from the retail store where this unit was purchased.

Ensure that this unit is protected from vibration and impact. Do not swing or drop this unit.

Do not place objects on top of this unit and do not drop objects onto this unit.

Do not attempt to twist or apply excess pressure to this unit.

Do not use this unit’s jacks for purposes other than those specifically designated for each jack. Always ensure that the cables are properly connected.

Do not insert foreign objects into this unit. The battery and the storage media are the only objects that may be inserted into this unit.

This unit should be powered-up and operated at least once every 6 months.

After each use, turn off the power and unplug the electrical cord from the outlet.

Prior to performing maintenance, always unplug the electrical cord from the outlet and remove the battery from this unit. Do not use benzene, thinners or alcohol to clean this unit. These chemicals may cause deterioration, distortion and discoloration of the case. To clean this unit, first use a soft, dry cloth to wipe off any dust. If this unit is extremely dirty, dilute a neutral dishwashing detergent with water, moisten a clean cloth with this detergent mixture, remove any excess liquid from the cloth, then wipe this unit clean. Finally, dry this unit with a soft, dry cloth.

Precautions Pertaining to the Battery

Caution:

Charge only with specified charger.

Charge the Battery within an ambient temperature range of 50 F (10 °C) and 86 F (30 °C).

The Battery may be warm after charging or just after use. This is normal.

Do not use an insufficiently charged or worn out Battery.

If charging is done in extreme low or high temperatures, Battery charge time increases.

Safety precautions:

Do not place the Battery near, or dispose of in fire.

Do not directly connect (short circuit) the positive (+) and negative (–) terminals.

Never attempt to disassemble or reassemble the Battery.

To avoid damage to the Battery:

Do not drop or jar the Battery.

Use the Battery with specified models only.

If the Battery is used in extremely high temperatures, a safety device will automatically prevent operation.

To ensure longer battery life:

While not in use, remove Battery from the unit and AC Adaptor and store in a cool, dark, dry place. If you leave the Battery in the unit or on the AC Adaptor, the Battery will no longer be rechargeable.

Keep the Battery terminals clean.

U.S.A. CONSUMERS: ATTENTION:

A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

8

Image 8 Contents
Model No. SV-PT1PP LSQT0622AInformation For Your Safety Dear CustomerFCC Note U.S. only SV-PT1End User License Agreement Table of Contents Slide Show Settings PC Mode SetupUsing the Applications PresentationThings You Should Know Main FeaturesAccessories Operating Precautions Safety precautionsTo avoid damage to the Battery To ensure longer battery lifeCard Data Protection Folder Structure Before UsingCompatible Card Copying and Backup Copying Memory Card PC Card HDDCopying PC Card HDD Memory Card Copying Memory Card PC CardData files will not Be copiedCopy Mode pp ~23 TV Mode pp ~41PC Mode pp ~49 Selecting ModesIndex Of Controls Front ViewLeft Side View End ViewUsing the Carrying Case Carrying the UnitAttaching the Hand Strap Upper compartment with the PC Card HDD mark facing upwardRecharging the Battery Pack Power Lamp Indications During ChargingRecharge is complete when Power Lamp goes out To remove the BatteryPC Card Slot Inserting the CardSD Memory Card Slot Turning the Power On HDD Safety SwitchRemaining Battery Life Display Place unit on a flat, level surfaceCopy Mode Display Indicator Displaying Menu Indicator FlowchartPress SET Press MenuCopy Mode Menus Copy Mode Copying To cancel copy in progressPress Copying will be performedDisplay the menu. p Formatting CardsFormat the SD Memory Card Format the PC Card HDD Matsushita Toshiba Melco Io Data LogitechDevices Press to select YES, thenTV Mode Setup Setup ConnectionsTurn on the TV and set it to Video mode Insert the Card into the unit. p Set COPY/TV Mode to TVMenu Area TV Mode TV Mode FunctionsInitial Screen TV Mode Display Information Displayable Image FormatsFolders and Files Menu SETViewing Images in the Index TV Mode Image DisplayUsing the Sub Menu TV Mode Album Selecting the Background BrightnessTo go to next or previous pages To return to Index Area Press MenuTV Mode Slide Show Menu Cancel SETPerforming Slide Show To pause the Slide ShowSelecting Images TV Mode Slide Show SettingsPress to return to Slide Setup Setting Screen Transition Effects Setting Screen Transition SpeedTV Mode Presentation Performing PresentationThen press SET To display the next slideTo unselect images Selecting Presentation ContentTo preview the presentation contents Rehearsal TV Mode Editing Example when selecting SelectDeleting Images Delete Press to select EDIT, then press SETFor select copy, follow How to Select Images instructions on Copying Images CopyProtecting Images Protect Press to select YES, Continue or CANCEL, then press SET How to Select ImagesPress Menu when image selection is finished Display an Image from an album TV Mode Full Screen PlaybackDisplay an Image from the index Enlarging an Image Zoom Displaying the Sub MenuBefore operating any function, press Menu for Sub Menu To return image to normal sizeWhen Left is selected Rotating an Image RotateTo save rotated images Select Save from the rotate menu, then press SETTo cancel properties display Repeat the above procedureProcessing Image Color Color Effect Displaying Image Information PropertiesPC Mode Setup System RequirementsSystem requirements are shown below USBPC Mode USB Driver ModePC Mode Operation with the PC File OperationsDisconnecting Unit from PC To turn unit power off while PC is connectedTo change the Card To replace the CardPC Mode Using the Applications InstallationSetup folder, double-click on Setup.exe Start PowerPoint confirming that the icon, right, is addedPresentation File Creation Click Start, Settings, and Control Panel PC Mode OtherUninstalling Jpeg Addin Software For Windows 2000/XP HDD Safety Switch OperationFor Windows 98SE/Me Copy Mode Liquid Crystal Display PC Mode Liquid Crystal Display TV Mode TV Screen DisplayReset Function Turn unit back on Before Requesting ServiceOff if no operation is performed for 5 minutes Card cannot be displayed using this unit If Backup is set to on, available space isConfirm card capacity on a PC as some data on Reduced by halfSpecifications Compatible Memory CardsImage Playback Copy FunctionsDimensions WeightOperating Weight Battery LifeAccessory Order Form VisaAM-5 PM M-F, 6 AM-1030 AM SAT, Pacific Time 20421 84th Avenue South Kent, WARequest for Service Notice USA OnlyProduct Repairs Centralized Factory Servicenter Customer Serivces DirectoryFor USA Only As of AugustLimited Warranty For USA Only Limited Warranty CoverageCarry-In or Mail-In Service Limited Warranty Limits And ExclusionsPanasonic Canada Inc