Using the Aegis Padlock
Entering and exiting the Standby Mode, Admin Mode, and User Mode
Entering the Standby Mode
The Standby Mode is the default working mode of the Aegis Padlock and is the gateway to other working modes.
To enter the Standby Mode, attach the Aegis Padlock to your computer. The drive automatically goes into Standby Mode and the indicator light turns red. In this mode, the Aegis Padlock is locked. It cannot be recognized by My Computer and it does not provide either the regular functions or the encryption function. However, it enables you to enter and switch between the Admin Mode and the User Mode.
Attention: To switch between the Admin Mode and the User Mode, you are required to switch to the Standby Mode first, and then you can enter the mode of your choice.
Entering the User Mode
To enter the User Mode, do the following:
1.Attach the Secure Hard Drive to your computer. It enters the Standby Mode.
2.Enter the User Password or the Admin Password (the default Admin Password is 123456) and press . The indicator light turns green indicating that the drive is in the User Mode. If the indicator light flashes red, you need to
Exiting the User Mode
To exit the User Mode,
Attach the Aegis Padlock to your computer again and the indicator light turns red. This indicates that you are in the Standby Mode.
www.apricorn.com | 8 |