Chapter 4: Configuration and Setup
NOTE: For proper installation, make certain that all power bricks are installed on the same side of every divider.
4.3 Inserting Dividers Into the Cart
Step 1. Beginning with the top row, insert a divider into the cart.
Figure 4-13. Begin to insert dividers into the top row of the cart.
Step 2. Then from the back of the cart, insert the power brick plugs hanging from the dividers on the left side of the cart into the power receptacles located on the bottom left of the cart. Repeat with the power brick plugs on the right side of the cart into the power receptacles located on the bottom right of the cart.
Figure 4-14. Netbook Cart dividers with attached power bricks.
Step 3. Plug the power cord from the bottom left receptacles into one of the timer’s receptacles and the power cord from the bottom right receptacles into the timer’s other receptacle.
Page 14 |
| NBC20S |