Chapter 4: Configuration and Setup
Figure 4-15. Electrical schematic for the back of the Netbook Cart.
Note the location of the timer.
In the back of the NBC, insert the power cord from the 10 or 16 electrical outlet unit into the LEFT outlet on the timer and plug the other electrical outlet unit into the RIGHT outlet on the timer. Push the timer tabs (located at the edges of the timer dial) inward towards the center of the dial. This will turn one side of the outlets on while turning the other off.
4.4Routing the Power Cords at the Back of the Netbook Cart Step 1. Plug the netbook outlet strips into the timer unit
Step 2. Feed the cord from the timer through the grommet hole on the side nearest the handle and wrap the cord around the handle itself or around the cord wrap below the handle.
Step 3. Plug the timer into a wall outlet.
NOTE: The outlet strips are only to be used for charging netbook computers.
NBC20S |
| Page 15 |