| AV 3 |
|
| IN | VIDEO |
|
| |
Pr |
| L AUDIO |
Pb |
| R AUDIO |
Y 
S VIDEO
AV 4
IN
VIDEO 1080i - 2Fh
Pr / R
H 
Pb / B 
L
V 
Y / G 
R
AUDIO
Peripherals connected to AV3
There are three possible ways to connect your Accessory Devices to the AV3 input.
&• In case of a peripheral with CVBS output, connect the video cable to the video input of the TV.
•In case of a peripheral with
•In case of a peripheral with component video cables, connect them to the Pb, Pr and Y inputs AND also connect a video cable to the video input (in order to have correct picture reproduction).
éAlways connect the audio cables to the peripheral’s AUDIO L and R jacks and to the L AUDIO and R AUDIO AV3 jacks on the TV.
AV4 Digital High Definition input
When you have a Digital Antenna cable connected to a digital Set top Box, connect the Set top Box to the AV4 IN VIDEO 2 Fh input.
Connect a Set top Box with 2 Fh RGB output to the H, V, R, G and B jacks and to the L and R AUDIO jacks.
Connect a Set top Box with 2Fh Pr, Pb,Y output to the Pr, Pb and Y jacks and to the L and R AUDIO jacks.
See also the manual of your High Definition Set top Box.
Note: This television is designed to accept high definition signal standards 480p and -
1080i as specified by the Electronic Industries Association standard EIA770.3.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or even combinations of these on your screen, check if the connections are done in the right way:
- for Y, Pb, Pr 2Fh: check if the cable colors match with the input connector colors
-for