TV VCR
Cable DBS
PreAmp Tuner
LD DVD
CD CDR
TV
power 1 2 3
source 4 5 6
freeze 7 8 9
surf0
Page 6 Page 7
TV control panels on the Pronto Remote Control
When you first tap the touchscreen, Home is displayed.
Here you’ll find a button for selecting the devices that Pronto is set up to operate. If
you get lost, you can always go Home. Just tap the |
| button. Tap one of the |
| ||
|
buttons to choose a device. Tap the TV button.
1/3 This is the first control panel of three
Macro menu: refer to the Pronto manual.
Tap to return to the Home control panel.
Tap the arrow up to proceed to the previous control panel.
Tap the arrow down to proceed to the next control panel.
TV You are in TV mode
power Tap the power button to turn on the TV.
The TV is never fully powered off completely unless it is physically unplugged. When the set is turned off, no LED lights up.
source Tap repeatedly to select TV, SIDE, AV1, AV2, AV3 or AV4 according to where you connected the peripherals (see p. 31).
Also see Settings, Source, p. 28, to name the AV inputs.
freeze See Settings menu, General, Freeze format, p. 24 where you can select among three modes to be displayed when the freeze button is tapped: Freeze, Replay, Photo Finish.
When the mode is Freeze: tap the freeze button to
When the mode is Replay: tap the freeze button to redisplay a few seconds of a stored video in a single PIP window. Tap the OK button, in panel 2 or 3, to display a few seconds of a new stored video picture.
When the mode is Photo Finish: tap the freeze button to display 12 PIP windows of stored video pictures. Tap the OK button, in panel 2 or 3, to display a new series of frozen pictures.
Note: continuing to hold the freeze button down will cycle the TV through the various modes (Freeze, Replay, Photo Finish).
Tap again to return to live picture.
12Tap the number buttons to select a TV channel.
surf With this feature you can easily switch between different TV channels/sources that currently interest you. In the menu system, you can set surf to two- or nine channel. (See Settings, General, Surf, p. 23.)
Tap this button to select the previously viewed TV channel or source in case of a Two channel surf, or to select the surf ring in case of a Nine channel surf.
In case of a Nine channel surf, a list appears at the right side of the television screen. On top, the most recently added. The puck is on the channel number currently viewed.
Tap the surf button again to tune to the next channel in the list or go to panel 2 or 3 and tap cursor up/down to select the desired TV channel of the list.
Tap the OK button or wait for the time out to dismiss the Surf list.
To add a new channel: tune to the channel or source you wish to add. Tap the surf button. Tap the cursor right to add.
If there are already nine channels/sources in the list, the one at the bottom of the list will be removed.
To remove a channel: select the channel number you want to remove. Tap the surf button. Tap the cursor right to remove.
Tap the OK button, in panel 2 or 3, or wait for the time out to dismiss the Surf display.